Installation Instructions

2
1A
1
1
Secure the mounting plate to the junction box.
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Align and place the fixture base onto the mounting plate studs and secure it with the two cap nuts.
Place the shade and spacer over the socket and onto the shade base, then secure them in place by screwing the collar nut
onto the socket. Repeat for remaining shades.
Screw the lamp into the socket. Refer to the label on the socket for Max Wattage Information.
For wet locations, caulk around the base of the fixture with waterproof construction sealant.
1
2
3
4
5
6
7
3
4
6
NEUTRAL WIRE
HOT WIRE
WHITE WIRE
BLACK WIRE
MOUNTING
PLATE STUD
Install the Fixture
MOUNTING
PLATE
8
JUNCTION BOX
8
FIXTURE BASE
CAP NUT
LAMP
SHADE
SOCKET
SHADE BASE
COLLAR NUT
5
7
SPACER