Assembly Instructions

Attach Leg Support Panel(C) between Leg Panels(B) using Bolt(③) and Washer(②) with Allen
Key(①) as shown in the picture above.
Repeat the same process to affix the another Leg Support Panel(C)
Do not fully tighten the bolts.
Step 1
Open the carton and place all the parts on a clean, non-marring surface.
Turn table top upside down,then attach Leg Panels (B) to the Table Top(A) using Bolt(③) and
Washer(②) with Allen Key(①) as shown in the picture above.
Repeat this process with the other Leg Panel (B)
Do not fully tighten the Bolts.
Step 2
Page 3 OF 5