Assembly Instructions

Step 2
Step 3
Step 4
Place the Chair on a LEVEL SURFACE to check for wobbles.
If it wobbles, adjust the Legs Pre-installed Levellers until the Chair is level with the ground.
Your Chair is ready for use.
This Chair can only be used on a flat, level surface.
Align the Hind Legs(C) with mounting positions on the base of the Seat(A).
Ensure the Leg mounting positions(C1) match the Seat mounting positions(C1).
Attach Hind Legs(C) to Seat(A) using Bolts(②) and Washers(③) with Allen Key(①) as shown in the
picture.
Tighten all Bolts in a sequential manner.
Align the Front Legs(B) with the mounting positions on the base of the Seat(A).
Ensure the Leg mounting postions(B1) match the Seat mounting pointions(B1).
Attach Front Legs(B) to Seat(A) using Bolts(②) and Washers(③) with Allen Key(①) as shown in the
picture.
Tighten all Bolts in a sequential manner.
Page 3 OF 4