Assembly Instructions
Step 1
Step 2
Step 3
Open the carton and place all the parts onto a clean, non-marring surface.
Place Seat(A) onto the edge of a platform, as shown in picture above.
Align the Hind Legs(C) with the mounting positions on the base of the Seat(A).
Attach the Hind Legs(C) to Seat(A) using Bolts(②) and Washers(④) with Allen
Key(①) as shown in the picture.
Do not fully tighten the bolts.
Align the Front Legs(B) with mounting positions on the base of the Seat(A).
Attach Front Legs(B) to Seat(A) using Bolts(②) and Washers(④) with Allen Key(①)
as shown in the picture.
Do not fully tighten the bolts.
Platform
A
Page 3 OF 5