Caution : You must read this before you proceed CHAIR Label Picture Description QTY A Seat 1 B Front Legs 1 C Hind Legs 1 Page 1 OF 5
Label Picture Description QTY ① Allen Key 1 ② Bolt (M6*20mm) 5 ③ Bolt (M6*25mm) 2 ④ Washer 6 Before Beginning Assembly: Overview Seat (A) Hind Legs (C) Front Legs (B) FRONT FACING This Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 1 Platform A Open the carton and place all the parts onto a clean, non-marring surface. Place Seat(A) onto the edge of a platform, as shown in picture above. Step 2 Align the Hind Legs(C) with the mounting positions on the base of the Seat(A). Attach the Hind Legs(C) to Seat(A) using Bolts(②) and Washers(④) with Allen Key(①) as shown in the picture. Do not fully tighten the bolts. Step 3 Align the Front Legs(B) with mounting positions on the base of the Seat(A).
Step 4 Attach Front Legs(B) to Hind Legs(C) using Bolt(③) and Washer(④) with Allen Key(①) as shown in the picture. Do not fully tighten the bolt. Step 5 Place the Chair on a LEVEL SURFACE to check for wobbles. If it wobbles lift the Chair to some 30cm to 50cm high from the ground. Keep your feet and toes well away from the drop zone. Drop the Chair freely and vertically with the four legs, hitting the ground, all at the same time.
Questions & Answers about Proposition 65 • What is Proposition 65? Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment.
