User manual

7
OPERATING INSTRUCTIONS
Power Station PS-300
INTRODUCTION
Dear customer,
Thank you very much for the trust you have placed in us. You have acquired a reliable high-quality product which will
deliver good services for a long time if used appropriately.
Please read these instructions for use thoroughly and completely prior to putting it into operation. You receive important
information for safe operation and maintenance of the device.
INTENDED USE
Die Power Station PS-300 dient der mobilen und netzunabhängigen Energieversorgung diverser 230 V und 12 V
Verbraucher. Damit können problemlos und flexibel Geräte wie TV- und Sat-Anlagen, Werkzeuge, Ladegeräte für
Mobiltelefone oder Laptops betrieben werden. Der eingebaute Akku darf nur über das beiliegende Ladegerät oder den
ebenfalls beiliegenden 12 V-Ladeadapter aufgeladen werden. Der Benutzer muss sicherstellen, dass das Gerät vor
Feuchtigkeit und Nässe geschützt wird. Eine andere Verwendung als zuvor beschrieben führt zur Beschädigung dieses
Produktes, darüber hinaus ist dies mit Gefahren, wie z.B. Kurzschluss, Brand, elektrischer Schlag etc., verbunden.
Das gesamte Produkt darf nicht geändert bzw. umgebaut und das Gehäuse nicht geöffnet werden.
Beachten Sie alle Sicherheitshinweise dieser Bedienungsanleitung!
INCLUDED IN DELIVERY
Power Station PS-300
Accu Trainer Pb
12 V charging adapter
Manual
SAFETY INSTRUCTIONS
The following safety notes and hazard warnings serve not only for the protection of the device but also for the
protection of your health. Please read the following points thoroughly.
In case of property damage or personal injuries caused by improper handling or non-observance of these operating
instructions or the safety notes stated herein, the warrant/guarantee expires. We assume no liability for any
consequential damages.
General
For safety and technical approval reasons (CE), the unauthorized conversion and/or modification of the product is not
permitted.
The Power Station performance at the output is 230V AC. Even in switched-off condition charged condensers may still
produce 230V AC at the output for a short time.
This device is no toy and must not be used by children! Please ensure childproof operation and storage of the device
at any time.
Maintenance, installation or repair works may only be performed by an expert/qualified workshop. Use only original
spare parts for repair work. The use of any other spare parts may lead to serious damage to property and personal
injury!
The interior of the device does not contain any product components which must be set or maintained by you.
Don’t leave packaging material heedlessly. It could become a hazardous toy for children!
Handle the product with care; impacts, shocks or even a fall from a low height may cause damage. In this case have
the Power Station checked by a qualified expert before restart.
If you detect damages, stop operating the device. Bring it to a qualified workshop or dispose of it in an
environmentally compatible manner.
Operation
The product may only be operated in a dry environment. It may not get humid or wet, otherwise there is a risk of life-
threatening electrical shocks.
The use of the product under unfavourable environmental conditions must be avoided under all circumstances.
Unfavourable environmental conditions include: ambient temperatures above 50°C, flammable gases, solvents,
vapours, dust, relative humidity in excess of 80%, and moisture.
The device may not be operated or charged in the presence of flammable materials or gases. Explosion hazard!
Ensure proper ventilation during the operational phase, never cover the Power Station and connected devices.
Never charge the rechargeable battery of the Power Station in poorly ventilated rooms. Charging lead-acid batteries
may lead to the production of explosive gases!
Protect the Power Station against electro-magnetic fields as well as impacts and vibrations.
Protect the Power Station against heat and frost! Should the Power Station freeze, it may cause permanent power loss
and severe technical damage!