User manual

Subjekt to technical alteration.
No liability assumed for typographical errors.
07/2000
IVT Innovative Versorgungs-Technik GmbH, Dienhof 14, D-92242 Hirschau
Phone [phone] or 71222, Fax [phone]
Internet: www.IVT-Hirschau.de
eMail: [e-mail]
Warning
– When charging the battery make sure that the charger is connected to the correct poles/terminals
of the battery.
– To avoid damage of the battery make absolutely sure that the battery is never overdischarged.
– Charge batteries only in well ventilated areas.
– Open the lead battery caps.
– Before charging the lead battery test the acid level.
– When charging for a longer period of time test the acid level several times.
– When charging the battery avoid open fire, direct lighting and sparks. (There is danger of
explosion with oxyhydrogen gas!)
– Pay close attention to the instructions an how to charge the battery (these instructions are
usually printed on the top of the battery).
Troubleshooting
If operation of the unit is not safe unplug immediately and make sure it is not put into further use.
This means:
– If there is visible damage of the unit.
– If the unit is not functioning.
– If any of the units components are loose or removed.
– If there is visible damage to the wiring.
If repair is needed use only original parts. Utilization of parts from other distributors may
result in damage to the unit and to the operator!
Service and repairs are to be made by authorized personnel only!
If the unit fails to operate return the unit to our company.
Specifications
Final charging voltage: 6 V-Battery: 6,9 V
12 V-Battery: 13,8 V
max. charging current: 6 V 1 A / 12 V 2,5 A
Mains voltage: 230 V AC 50 Hz
Dimensions (L x W x H): 90 x 65 x 95 mm
Weight: 200 g
Delivered: Energy conservation battery charger with battery-clips and operating instructions.
Anleitung-4sprachig-900008.p65 15.11.00, 12:356