User manual

OPERATING INSTRUCTIONS
Automatic charger CE
6 V 1 A / 12 V 2,5 A
230 V AC 50 Hz
Dear Customer,
Thank you for buying our product. You have bought one of the most powerful and reliable
Automatic Chargers of its class.
Please read the operating instructions carefully before use.
WARNING!!! Safety Instructions!
– Keep out of reach of children! The Charger operates on 230 V AC!
– Do not use the unit under the following conditions:
in places which are dusty or damp, in a high humidity area (over 80% rel. humidity),
temperatures above 50 °C, in areas containing combustible materials (liquids/solvents, gas),
do not immerse in water.
– Use only in enclosed, dry areas.
– Should the Automatic Charger fail to operate or show indications of not operating properly
unplug immediately and make sure that the Charger is not put into further use. Do not use
when visible signs of damage to the Charger or wiring, due to transport or inadequate storage
are noticeable.
– Service and Repair – Service and repairs are to be made by authorized Personnel only.
– With this automatic energy conservation battery charger you can automatically charge all lead
batteries (6 V and 12 V).
Description of Operation
With this automatic energy conservation battery charger you can automatically charge all lead
batteries (6 V and 12 V) without supervision. When the connected battery is recharged the
final charging voltage is reduced and the battery is protected from overloading. Because of the
fully electronic voltage and current characteristic the battery is always kept on optimal charge
and at the same time there is no danger of overloading and therefore it prevents the building of
oxhydrogen gas. As long as no battery is connected to the charger, a safety switch prevents
voltage from remaining on the charger clip.
The unit has the following functions:
– Short circuit and wrong polarity protection
– Constant final charging voltage
– No charge when the battery is not connected properly
– Only charges when the polarity is correct
– Optical LED for charge (Laden) and polarity (Polarität). If the unit is connected incorrectly
LED (Polarität) will light.
Anleitung-4sprachig-900008.p65 15.11.00, 12:354