Installation Guide
Follow the remedies in order. Unless instructed otherwise, use a clean, white cloth or towel
with products recommended for IVC US Luxury Vinyl Tile/Plank ooring. Always rinse the
aected area with clean water after treatment.
– acids, alkalis, blood, catsup, mustard, food, fruit, fruit juices, candy,
cleaners, strong soaps, dye, dye markings, urine and feces, grass, iodine, mercurochrome
and rust
- First, remove as much solid material as possible.
- Scrub area with cleaner full strength.
- Rub the area with a 10/1 dilution of water/liquid bleach.
- Rub the area with isopropyl alcohol.
- If rust stain does not respond, use lemon juice or a cream of tartar solution.
– Dry cleaning uids, lacquer and latex paint, nail polish, solvents,
oil-based paints, wood stains and varnish
- If substance is dry, gently peel it from the oor. Avoid sharp instruments that could
scratch oor.
- Scrub area with non-abrasive cleaner.
- Rub lightly with odorless mineral spirits or paint thinner.
: Do not use acetone or nail polish remover!
– adhesives, chewing gum, oil, grease, candle wax and tar
- First, remove as much solid material as possible.
- Carefully remove excess with a spoon or ngernail.
- Scrub area with non-abrasive cleaner.
- Rub lightly with odorless mineral spirits, isopropyl alcohol or lighter uids.
– rubber heel marks, shoe polish, scus and smudges
- Rub the scu with ngertip, rubber will come right o. The friction from the rubbing
will remove rubber.
- Scrub area with non-abrasive cleaner.
- Rub lightly with isopropyl alcohol or lighter uid.
!
Isopropyl alcohol, lighter uid, odorless mineral spirits and paint thinner are ammable
solvents. Carefully read and follow cautionary information on their respective labels. Keep
trac o treated area for 30 minutes.
Leading the Way
Care and Maintenance Guide - Residential
This document is reviewed on an ongoing basis. Control #: MKF_0007_0 8/2/2013