Warranty

Align the notches on the Feeding Tube with the corresponding
openings on the Main Body. Press it in and turn counterclockwise
until you hear a loud click and the release button pops out.
HOW TO ASSEMBLE:
Place the Screw Rod into the Feeding Tube with the metal bit
facing inward. Fit the metal piece into the corresponding hole in the
Feeding Tube.
Fit the Strainer around the Screw Rod with the metal grate
facing down. It should fit into the notches on the Feeding Tube.
Insert the Tube Lid into the corresponding notches at the end of
the Feeding Tube, with the symbol pointing to the symbol.
Turn the lid counterclockwise, until the symbol points to the
symbol and the Tube Lid locks into place.
Place the Juice Cup on the black platform on the Main Body
of the unit underneath the grated section of the Feeding Tube
where the juice will come out.
Place the Pulp Catcher underneath the mouth where pulp will
be dispensed.
Flip the outlet cover to the left (toward the Main Body) so that
the Juice Outlet is uncovered. Plug the unit in.
1
2
3
4
5
6
7
8
C
ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
D
D
Juice Outlet on/o
Flip left/right
Pulp
E
C
C
C
C
D
Notches
C
C
G
D
H
H
I
J
J
J
C
D
H
I
J