Ivation® Masticating Juicer SKU: IVMJ401B User Guide
Thank you for purchasing the Ivation® Masticating Juicer. This User Guide is intended to provide you with guidelines to ensure that operation of this product is safe and does not pose risk to the user. Any use that does not conform to the guidelines described in this User Guide may void the limited warranty. INTRODUCTION Please read all directions before using the product and retain this guide for reference. This product is intended for domestic use only and is not intended for commercial use.
SAFETY PRECAUTIONS • Don’t try to operate this device without reading the instructions. • Never attempt to plug the juicer in with wet hands, as this could result in a severe electric shock. • Do not submerge the main body of this juicer in water or any other liquids. • Do not insert utensils, hands, fingers, or other objects and/or appendages into the feed barrel or juice outlet as this could cause severe injury or damage to the juicer.
PRODUCT PRECAUTIONS • Make sure to familiarize yourself with the appliance before using it. • Before using this appliance, check all the parts to make sure they function properly, and are undamaged. • Make sure that every detachable part has been properly installed before you plug the unit in. • Never run the juicer without something to juice. • Always inspect the cord and other parts of this unit for signs of damage before attempting to plug it in.
TABLE OF CONTENTS INTRODUCTION 2 SAFETY PRECAUTIONS 3 PRODUCT PRECAUTIONS 4 TABLE OF CONTENTS 5 PACKAGE CONTENTS/ PRODUCT OVERVIEW 6 BUTTON AND LOCK INSTRUCTIONS 7 ASSEMBLY INSTRUCTIONS 8 USAGE INSTRUCTIONS 9 OPERATING TIPS 9 TIPS FOR CHOOSING INGREDIENTS 10 CARE AND MAINTENANCE 11 DISASSEMBLY INSTRUCTIONS 11 TROUBLESHOOTING 13 SPECIFICATIONS 14 CONTACT US 14 TABLE OF CONTENTS 5
PACKAGE CONTENTS • Juicer components: A Pushing Rod B Tray C Feeding Tube D Main Body E Juice Outlet F Juice Cup G Pulp Catcher H Screw Rod I Strainer J Tube Lid • Cleaning brush PRODUCT OVERVIEW • User guide A Pushing Rod B Tray H C I Screw Rod Feeding Tube J Strainer Tube Lid Start Stop Hold to Reverse Key Panel Main body D Release Button Juice Outlet Juice Cup Pulp Catcher E F G Make sure to thoroughly clean all components that come into contact with the juice and i
BUTTON & LOCK INSTRUCTIONS Release Button Start Stop Hold to Reverse START/STOP: Press this button once to start the juicing process. The juicer will run for 15 minutes and then automatically stop itself. If you need to stop it sooner, press the Start/Stop button a second time. HOLD TO REVERSE: If the unit becomes clogged while running, press the Start/Stop button, then press this button and hold it for a few seconds to reverse the rotation of the screw rod.
1 HOW TO ASSEMBLE: Align the notches on the C Feeding Tube with the corresponding openings on the D Main Body. Press it in and turn counterclockwise until you hear a loud click and the release button pops out. Notches C ASSEMBLY INSTRUCTIONS D 2 Place the H Screw Rod into the C Feeding Tube with the metal bit facing inward. Fit the metal piece into the corresponding hole in the C Feeding Tube. 3 Fit the I Strainer around the H Screw Rod with the metal grate facing down.
10 Clean the prepared ingredients and cut them down into manageable sizes to feed into the juicer. Load the ingredients onto the feed drum or into the C Feeding Tube. 20 Press the Start/Stop button to start the product, and use the A Pushing Rod to slowly and gently feed the ingredients down into the barrel. Do not use your hands. USAGE INSTRUCTIONS NOTE: This product comes with an intelligent protection chip, which automatically stops the motor after 15 minutes of continuous use.
A ro p NO fib ro T us I p p ro du c N OT e h SU ig h IT in E t BtLe i n/ fa L E Auce D ro d TIPS - CHOOSING INGREDIENTS • Choose fresh ingredients which contain more juice. For example: apples, pears, pineapple, watermelon, oranges, carrots, tomatoes, cucumbers, etc. (Remove thick skins from melons, pineapples, citrus fruits, and others. It’s also good to remove seeds, as skins and seeds can add a bitter flavor to the juice.
1 2 3 4 CARE AND MAINTENANCE 5 6 After using this product, make sure to unplug it from the outlet and clean it promptly. Use a damp cloth or wipe to clean the main body. Do not wash or soak the main body in water, as this could damage it and create an electrical shock hazard. Do not use steel wool, abrasive detergent, or corrosive liquids such as gasoline or acetone to clean this product.
2 Press the Release button and twist the C Feeding Tube clockwise to remove it from the D Main Body. DISASSEMBLY INSTRUCTIONS C D Unlock key 3 Remove the J Tube Lid by twisting clockwise to unlock and then pulling straight toward yourself. 4 Remove the I Strainer by pulling it straight toward yourself. Do the same with the H Screw Rod. C 4 H I J Rinse all of the parts under warm, but not hot, water to remove all the pulp and other food ingredients remaining.
ISSUE Product does not turn on. The motor has an odd smell. POSSIBLE CAUSE Power cord is not connected, or not connected properly. Connect power cord properly to a wall outlet which has power. The product has been running too long and smart protection kicked in to protect the motor. Wait 20-30 minutes and attempt to use the machine again. If the juicer is still new, this is normal and not a cause for concern. If the smell continues after multiple uses, contact Ivation® customer care.
SPECIFICATIONS • • • • • • Rated Voltage: 120 V Rated Power: 150 W / 50/60 Hz Rated Motor Speed: 70 RPM Continuous Operation Time: ≤ 15 min Interval Time (after continuous use): ≥ 20 min Dimensions: 13.78" x 6.69" x 14.17" (350 x 170 x 360 mm) NOTE: Some of the parameters of this product may be subject to change without notice. Questions or problems? CONTACT US! info@myivation.com 1-866-849-3049 IVATION is a trademark of C&A IP Holdings, LLC, in the U.S, Canada, and the E.U.
