Use and Care Manual

ASSEMBLY

ATTACHING THE CO TANK

You have two options for attaching the tank:

1. Install the tank inside the kegerator for a cleaner look.

a. Attach the tank through the retainer, and secure it with

the provided bolt and nut.

b. Position the tank so you can read the gauge and have

easy access to the shut-o valve.

2. Install the tank at the rear of the kegerator to allow extra

space inside the unit.

a. Align the four holes on the CO tank retainer with the

four slots on the back of the kegerator.

b. Use screws to fasten the retainer into the holes.

c. Place the CO tank in the retainer.

d. Feed the gas line hose through the hole in the back

of the unit and connect it to the regulator in

accordance with the steps in the Installing the CO

Regulator and Tank section on page 14.

INSTALLING AND SETTING UP A BEER KEG

This kegerator and beverage cooler ﬁts almost all brand-

name kegs, with the exception of Coors® kegs.

Keg sizes that can be used in your kegerator are as follows:

Barrel Gallons Liters Ounces 12 oz. Glasses

15.5 59 1984 164



7.8 30 992 82



5.2 20 661 55

⅛

4.0 15 496 41