Use and Care Manual

ASSEMBLY

REVERSING THE DOOR ON YOUR KEGERATOR

This kegerator has the capability of the door opening from

either the left or right side. It is delivered with the door

opening from the left side. If you wish to reverse the direction

in which it opens, please contact customer care for reversal

instructions.

ASSEMBLING YOUR KEGERATOR

INSTALLING THE CASTERS (OPTIONAL)

1. Remove all the contents of the kegerator and tip it onto its

back.

2. Attach the two metal washers (included) to the locking

casters, to prevent scratching the cabinet, and then

attach the two locking casters in the front underneath the

kegerator. You will need to puncture the white plastic to

attach the casters.

3. Install the other two non-locking casters in the rear

underneath the kegerator as shown below.

4. Unscrew and remove the black feet in the front of the unit.

Store them in a safe place in case you want to remove the

casters and simply use the feet at a later time.

5. Once all four casters are evenly tightened, return the unit

to an upright, standing position.

6. Step on the front of the locking casters to lock the

kegerator into place and prevent it from rolling. Step on

the back of the locking casters while locked to unlock

them and allow the wheels to roll.

Locking casters

Casters