Use and Care Manual
5
Make sure the power switch on top of the unit is in
the OFF position.
Turn on your car.
Select the AC plug or DC car adapter and connect
the cable to a compatible power source.
Locate the DC car adapter
connected to the unit.
Set device to cooling or heating with the switch:
Insert the plug of DC car adapter
into the socket of car.
Move the power switch to choose
COLD or HOT mode.
Cooling: set the switch to the COLD position. The
green light indicator will come on, showing the unit is
in cooling mode.
Heating: set the switch to the HOT position. The red
light indicator will come on, showing the unit is in
heating mode.
INSTRUCTIONS
1
1
2
2
3
3
4
INSTRUCTIONS
Using the DC car adapter
INSTRUCTIONS
NOTE: To obtain an optimal cooling eect, we suggest
placing pre-chilled foods and drinks in the unit. It will
take about 2 to 3 hours to cool food or drinks that have
not been pre-chilled. The interior of the appliance is not
designed to heat cold food, but to preserve hot foods at
a warm temperature. If necessary, it can heat food after
running continuously for more than two (2) hours. If
instructions were followed properly, the temperature of
foods can be maintained for hours.