Full Product Manual

• Cont. Button
Continuous mode: To set the dehumidifier to run constantly without a timer, press the continuous mode
button. The continuous mode light will turn on.
• Turbo Button
Press to select either high or normal fan speed. Choose high speed for maximum moisture removal.
• Timer Button
Use to set the dehumidifier to automatically start or stop. To set a time, press the timer button until the
desired timer light (“On” or “Off”) turns on. Use the left and right arrows to increase or decrease time.
Adjust the time in .5 hour increments up to 10 hours, and then at 1 hour increments up to 24 hours.
The selected times will register in 5 seconds and the system will then automatically revert back to
displaying the humidity setting.
Turning the unit ON or OFF at any time or adjusting the timer setting to 0.0 will cancel the Auto Start/
Stop function.
• Left/Right Button: Humidity Setting
The relative humidity level can be set between 35% — 85% in 5% increments.
The left/right button is also used to set the Auto Start and Auto Stop times.
• Power Button
Turns the unit on and off.
• Indicator Lights
o Filter (Indicates that the filter should be cleaned)
o Full (Reservoir is full)
o Cont. (Continuous dehumidifying is in operation)
o On (Timer)
o Off (Timer)
o Turbo (High fan)
o Pump (Pump is operating)
o Comfort (Comfort mode)
o Auto defrost (Auto defrost operation)
Automatic Features
• Auto shut off: The unit will automatically shut off when either the reservoir is full or the set humidity is
reached. Wait 3 minutes before resuming operation.
• Auto defrost: When frost builds up on the evaporator coils, the compressor will cycle off and the fan
will continue to run until the unit has defrosted.
• Auto restart: If the power is cut unexpectedly, the unit will restart with the previous settings when
power resumes.