Full Product Manual

Correct Placement
Place the unit with proper clearance from walls or furniture.
Parts and Function
Operation
• Pump Button
Press to activate pump operation.
NOTE: Make sure the pump drain hose is installed into the unit and the continuous drain hose is removed
from the unit before pump operation is activated. When the reservoir is 3/4 full, the pump will activate.
Refer to the next pages for removing the collected water.
Do not use this feature when the outdoor temperature is equal to or less than 32°F (0°C).
• Comfort Button
Press to activate continuous dehumidifying operation.
In the Comfort mode, the unit will automatically control room humidity between 45% — 55% according
to the room temperature. Note that the humidity cannot be manually set while in this mode.
• Filter Button
The filter LED light will illuminate after 250 hours of operation to remind you to clean the air filter to
obtain maximum performance and efficiency. To reset after cleaning the filter, press the Filter button
and the light will go off.
More than
15"/40cm
More than
8"/20cm
More than
8"/20cm
More than
8"/
20cm
rearfront
Control Panel
Handles
(both sides)
Air Intake Vent
Air Filter
Water Reservoir
Power Plug
Air Outlet Vent
Drain Hose Outlet
Power Cord Band
Power Cord
Pump Drain
Hose Outlet