User Manual
6
PRODUCT OVERVIEW
PRODUCT OVERVIEW
LIGHTS AND DISPLAYS
A
Power indicator light
B
Filter indicator light
C
Nonstop operation indicator light
D
High, Medium, and Low fan indicator lights
E
4 hour or 2 hour delay on/o indicator lights
F
Full indicator light
indicates bucket needs to be emptied or is not in place in the unit
G
Pump mode indicator lights
CONTROL BUTTONS
H
POWER
Press to turn the dehumidifier on and o.
I
FILTER
Turn o the CLEAN FILTER indicator LED (automatically turns on after
250 hours of operation to remind you to clean the filter).
J
-/+
Set the humidity level in 5% increments within a range of 35% to 80%.
Set the unit for continuous operation by pressing the minus button
until the screen reads NS.
NOTE: If Nonstop is selected, the dehumidifier will operate continuously
at its maximum setting if attached to a drainage hose or until the
bucket is full.
K
DISPLAY
Shows the set % humidity level while setting, then shows the actual
room % humidity level (± 5% accuracy).
L
FAN SPEED
Toggles fan speed settings between High, Medium, or Low.
M
TIMER
When operating, press this button to set device to automatically turn
o in 2 hours or 4 hours. When o, press this button to automatically
turn device on in 2 hours or 4 hours.
N
PUMP
Press and hold this button for three (3) seconds to starting running the
unit in pump mode.
CONTROL PANEL
The control panel may dier slightly from the illustration below.
A
H I J K L M N
B
C
E
F
G
D