Use and Care Manual

USAGE

EMPTYING THE WATER BUCKET

When the water bucket is full, the icon will appear on the display

and any connected device will receive a “water tank full” notiﬁcation.

1. Turn o the dehumidiﬁer before attempting to remove the water

bucket.

2. Remove the water bucket by pulling it out from the front of the

dehumidiﬁer.

3. Lift the water bucket by the handle, dispose of the water, then

clean the water bucket before replacing it inside the dehumidiﬁer.

1 2 3 4

NOTES:

• Clean the bucket with clean water if needed. Do not use abrasive

solvents or hot water.

• Be careful not to remove or damage the ﬂoat in the bucket, or the

unit will not work properly.

• If the water bucket is replaced incorrectly, the

icon will blink on

the display.

CONTINUOUS DRAINING

1. Use a screwdriver to remove the knockout on the back of the

unit, revealing the drain hole.

2. Lead the included drain hose through the revealed drain hole. Be

sure that it does not bend in any place.

NOTE: Do not remove the water bucket when connecting the hose.