Electric Chainsaw User Guide IVACS1390 Thank you for purchasing the ivation® Electric Chainsaw. This User Guide is intended o provide you with guidelines to ensure that aeration of this product Is safe and does not pose risk to the user. Any use that does not confirm to the guidelines described iy this User Guide may cold the limited warranty. Pleads read all directions before using the product and rental this guide for reference. This product is Intended for outdoor use only.
Bax Contents Eng ire Bar chain Bar cover User glued Parts Back handle Front handle gain break and security protector Chain Looking rut Bar cover Bar Cable Claw 10, Security button 111712 14 11 Cable holder 12, Conjoint trigger 13. Ol deposit cap 14 il level 15.
Safely Precautions Carefully review all information included in the user guide Failure 1o follow instructions and safety precautions can result In serous Injury. This product Is intended for adult use only. Keep out of reach of children and pets. Do not operate this machine when trad or under the Influence of drugs, alcohol or medication. Always check that the switch Is In an open position before connecting o @ power source or picking up. Risk of serous Injury.
Always disconnect the cable before performing maintenance on the machine. This machine is intended for sitting wood only. Do not attempt to cut any other materials with this machine. Do not use the making i the switch cannot be switched from closed to open. Maniacal ares esp the blade clean and sharp. This will reduce the risk of losing control of the machine. Esp the handles dry and clean. Dirty or wet handles can result In 2 loss of control over the machine.
Mounting the machine 1 Activate the chain brake by pushing Forward until you hear click. 2. Loosen the blocking nut of the bar and remove the chain cover, 8. Place the teal on the bar, checking that the teeth are facing the cor vest way. 4 After fitting the chain, mount the bar while placing the halon around the pinion, g8 shown, 5. Replace the cover by Inserting the b Into the hole, as shown o arrow 3.
3. Setup the cable * Insert the cable into the holder found on the back of the making as shown. { using an extension cord, use one that is completely unrolled and has a maximum length of 821st (28m). 4 Tension the chain * Before pensioning the chain, always remove the cable from the machine and wear safely gloves Male sure that the chain Is inside the ber guide.
Holding the machine 1 Always hold the machine firmly with both hands and by the handles. 2. Hold the front hands with your left hand and the back handlebar with your right hand, regardless of whether you are right or left handed 3.
< Always make sure you are by 2 stable and balanced position, never leaning on the tree belong Teller + if working on an incline, place yourself on the top of the incline, so halt the tree does no troll towards you after belong ot Curling 2 trunk placed on the ground 1 Plans the trunk fully on the ground. G 2. Cut halfway through the trunk from the top. 3. Turn the trunk halfway and cut the rest of the way.
Che cl the oil deposit for clogging Dismount the bar and check that the ol deposits not clogged. 8s shown Sharpening the chain The chain may lose sharpies while working. Fay of the following happens, it s tme to sharpen the chain 1. More effort then usual's sadness to out 2. Theodosius not straight 8 The machine is vibrating more than usual 4. When curling, you see small shavings hi stead of the log splitting.
