User manual

35
4.0 SETTINGS
4.1 User profiles
The function is used for setting up the mobile phone to remind incoming calls and short messages in
different ways under diffrent enviroments. Choose mode and go to customize by using the upper/lower key:
4.1.1 General mode
The default mode is the normal mode without any customization, and the user can chose the general mode
and customize the settings, which includes:
(1) Activate：set the general mode as the default mode.
(2) Customize： includes setting up ringtones, volume etc.
Ringtone settings： press the up or down key to select the ringtone, the mobile phone will play the
selected ringtone, and the left soft key is to confirm the selection.
Volume settings： set the ringtone volume; the default standard ringtone volume is level 3.
Alert Type：select the incoming call alert mode, which includes ringtone only, vibration only, vibration and
ringtone, ringtone after vibration.
Ring style： the ring can be set as types of single, repeat and ascending.
Extra tone: set relevant alert ringtone of warning, error, camp on and connect;
Answer mode： set to press any key to answer the incoming calls;