User guide

15
Battery Power Reminder
If the battery is not used for long periods, fully charge the battery before use
again.
The battery can be charged and discharged hundreds of times, but it will
eventually wear out. When the talk and standby times are noticeably shorter than
normal, replace the battery.
If the battery is completely discharged, it may take many minutes before the
charging indicator appears on the display or before the phone can be used.
Your device is powered by a rechargeable battery. The full performance of a new
battery is achieved only after two or three complete charge and discharge cycles.
If a replacement battery is being used for the first time or if the battery has not
been used for a long period, it maybe necessary to connect, disconnect and then
reconnect the charger before charging occurs.
4.5 Turn On or Off
Press the Power key for a several seconds and until the phone powers on. The idle
screen appears in the display.
If phone lock password has been set you will be requested to enter the same, then
press the OK key to confirm.
If PIN code has been set you will be requested to enter the same, then press the
OK key to confirm.
To turn phone off Press the Power key until phone turns off.
Note: The background screen appears when the phone is turned on and is in
standby.
4.6 Make a Call
Enter the phone number to be dialed and then press the Send Key
Note: Before using the phone, ensure SIM Card is inserted and battery has been
correctly fully charged.
4.7 Use of Passwords / Codes
Your phone and SIM card have different passwords/codes, which help prevent
unauthorized use of your phone and SIM card.
Enter the correct password/code when prompted,
then press the Send Key or M1 Key to confirm.
If you enter a wrong password, press the End Key to delete the wrong
password/code, then re-enter the correct passwords.
In the Menu “Security” there are the various options relating to the PIN, PUK and
Phone passwords/codes.