User guide

14
When SIM card is incorrectly inserted or damaged, the screen will display “No SIM
Card”
After the phone is turned on. Check the SIM card is correctly inserted and not
damaged and then turn on the phone again.
If the screen displays “SIM Card Damaged”, please forward it to the network
operator for repair.
4.2 Install the Battery and Battery Cover
Gently push the battery into the battery slot, ensuring the metal contacts on the
battery are faced downwards and in the position to be in contact with the metal
contacts in the phone.
Insert the battery cover, by gently pushing it upward until in place.
4.3 Charge/Recharge the Battery
Insert the charger into the charger socket; Be careful that only the original charger
is used and in correct position.
Connect the electrical plug side of the charger into electric power plug.
When charging is complete always disconnect first form electrical source and then
from the phone.
Notes:
When battery power is low the phone can not be turned on, keep under charge
until the screen resumes indication of power in the battery.
Make sure that the standard voltage and power match the voltage and power
indicated on the charger.
During the charging/recharging period, it is best to keep phone turned off.
Use the battery only for its intended purpose. Never use any charger or battery
that is damaged or not original.
4.4 Use of Battery
Monitoring Battery Power
When the battery is low or nearly empty:
The battery low message displays.
The empty battery icon blinks and phone turns off.