User manual

4
1 Up Button
2 Down Button
3 OK/Menu Button
4 Earpiece
5 Screen
6 Shortcut KeyA B C D
7 End/Power Key
8 Send Key
9 Numeric Key
10 Microphone
11 Earphone/Charger plug
12 Speaker
13 Battery Cover
3.1 Keys
This phone has the following keys:
Key
Name
Annotations
Send Key
Dial or answer a call.In Idle mode, press this key to browse the Outgoing Calls.
End Key
End a call. Long press this key to turn on or off the phone.
In the Menu options, press to return to Idle mode.
Short-cut keys
Press key to select the phone number saved in each key.
In Menu options A is used to move cursor to the left and B to move the cursor to
the right.
Up, Down Key
To scroll the options in menus or the items in the Phonebook
In Edit mode, moves the cursor up or down.
During conversation to adjust volume loudness.
OK/Menu
key
In the idle screen, press the key to access Main men.
It also can be used to confirm or select.
Keypad
Keypad for input of numbers, letters and some available special characters.
In the Edit screen, press # to change the input method; press * to switch to the
Symbol interface.
In Idle mode, Long press the # key to switch between the current profile and the
Conference mode.
3.2 LCD Display
The Display shows different information
Status icons ;: Text and Graphics Area are in the middle, which shows numbers, words and icons.
Names of the instruction are shown at the bottom.
3.3 Status Icons
| | | | | |____________ Battery power level
| | | | |_________________ Call divert
| | | |_______________________Alarm on
| | |_____________________________ International Roam
| |___________________________________Earphone
|_______________________________________ Network Signal strength
Ring tone status: --- Mute ----- Vibration
3.4 LCD Backlight
The backlight time duration on the display screen and keypad can be set in Display Settings. If you do not press any key within a certain
period of time, the backlight will be turned off automatically when the set time duration expires.
4. Quick Introduction
4.1 Remove the Battery Cover and Insert the SIM Card
The SIM card stores your phone numbers, PIN (personal identification number), PIN2, PUK (PIN phone unlocking key), PUK2 (PIN2
unlocking key), IMSI (international mobile subscriber identity) codes and network information, as well as Phonebook and SMS (Message
service) data, etc.
How To Install
Before installing the phone must be turned off and not connected to battery charger or any other accessory.
1) Put the phone backside up, press the concave part on the battery cover; push the battery back downward to take it out.
2) Gently slide the SIM card into the slot metal side downwards until the card is in place, Please ensure cut angle of the card corresponds
to the slot.
SIM Card Precautions:
1) Turn off the phone, and wait a few seconds before removing or inserting the SIM card .
2) Handle the SIM card with care, do not bend or scratch the SIM card.
3) When SIM card is incorrectly inserted or damaged, the screen will display “No SIM Card”
after the phone is turned on. Check the SIM card is correctly inserted and not damaged and then
turn on the phone again.
5）If the screen displays “SIM Card Damaged”, please forward it to the network operator for repair.
4.2 Install the Battery and Battery Cover
1) Gently push the battery into the battery slot, ensuring the metal contacts on the battery are faced
downwards and in the position to be in contact with the metal contacts in the phone.
2) Insert the battery cover, by gently pushing it upward until in place.
4.3 Charge/Recharge the Battery
2) Insert the charger into the charger socket; Be careful that only the original charger is used and in