User manual

7
4.1 Keys
This phone has the following keys:
Key
Name
Annotations
Send Key
Press to Dial or answer a call.
Press to switch on / off handfree during conversation
End Key
Press to end a call.
Press for several seconds to turn the phone on or off.
To cancel input of numbers to dial or to be saved.
Up/ Down Key
Press to enter Main Menu.
Long press to activate keypad lock
Press to adjust the volume during conversation.
Direct Dial Keys
Press key for rapid dialing phone numbers
Signal Lights
1) Green light flashing: network signal is high
2) Red light flashing: battery is low.
3) Green light fixed: no network signal
4) Red light off: battery is sufficient.
5) Red light fixed: battery is charging.
SOS
Press to dial SOS number.
5. Instructions
5.1 Installation Instructions
How To Install the SIM Card
THE PHONE MUST BE TURNED OFF AND DISCONNECTED FROM ANY DEVICE OR POWER SOURCE.
1) Turn the phone backside up and Gently press and push downwards the cover; preferably near the top of the
phone, and gently remove.
2) Insert the SIM card, the seat is at the bottom on the left side, by very gently sliding the card into position .
Note: The cropped corner of the SIM card shall correspond to that of the outline of the seat and metal side
downwards.
SIM CARD Codes / Password
ATTENTION: To activate or deactivate this function the SIM Card must be inserted in a standard GSM
phone as this phone does not have this function.
－PIN1 code
PIN code（Personal identify number）prevents unauthorized use of your phone. The PIN code usually comes from
your service provider along with the SIM card.
If you enter the wrong code three times continuously, the PIN code is locked. To unlock the PIN code, you need a
personal unlocking key (PUK) from your service provider.
—PIN2 code
Some functions, call costs for example, require a second PIN2 code. The PIN2 code comes from your service
provider along with some of the SIM cards, and these functions are only available when the SIM card supports
them.
If you enter the wrong PIN2 code three times, the PIN2 code is locked. To unlock the PIN2 code, you need a
personal unblocking key (PUK2) from your service provider.
PIN CODE
When the phone is turned on the appears.
1 Digit the correct Pin or PUK Code By pressing the number keys corresponding to the number to be entered.
2. Press the Send Key to confirm
SIM CARD Precautions.
1) Handle the SIM card with care, as scratches or bending damages the SIM card.
2) If the SIM card is inserted incorrectly or is invalid or damaged the screen will display
after the phone is turned on.
Remove the SIM card, check if it has been inserted correctly and re-insert correctly.
3）If the screen still displays , contact the network operator.
5.2 Install the Battery and Battery Cover:
1) After installing the SIM Card to install the battery .
2) The metal contacts on the battery must be in correct position.
3) Very gently position the battery contacts to the phone contacts and very gently push into place.
4) Replace the battery cover, by very gently placing the cover in position and gently slide to lock onto the back.
5.3 Charge/Recharge the Battery
2) Gently push the charger plug into the socket; ensure the plug is in the correct position ; shape of the
plug matches the shape of the socket.