User manual

11
4.8 Answer a Call
When the phone rings to answer the call:
1) Press the Send key
2) To end the call, press the End key
3) To refuse and not answer a call, press the End key
Note: If the caller ID can be identified, the phone will show the
telephone number of the caller.
4.9 Short-cut Numbers
To insert and save a shortcut number
1) In the standby screen, press the OK key to enter the editing
screen and ―select the key‖ appears on the screen.
2) Press the key to which the number is to be saved, and displays on
the screen.
Example press the ―A‖ key.
3) Press the OK key and ―input number‖ appears on the screen
4) Insert the numbers of the phone number to be saved.
5) Press the OK key to save and ―operate succeed‖ displays.
Note: Whilst inputting the numbers:
a) Press the up/down key to move the cursor backwards and
forward
b) Press the end key to delete the number behind the cursor
c) Press the No. key once, twice in quick succession or three times
in quick succession to input the corresponding number.
Example Pressing the "A" key once to input "1", twice quickly to
input "2", three times quickly to input "3".
Save a short-cut from an incoming call.
The short-cut numbers can be saved from an incoming call when the
number appears.
When the phone rings and the Phone number appears
1) Long press the shortcut-key to which the number is to be saved ( A,
B, C, D or E ) until on the display ―Replace?‖ appears.
2) Press the OK/key to save ―number is saved‖ appears on the screen
and the number is saved.
Note: Any number that was saved on the short-cut key is
deleted and replaced by the new number.
4.10 SOS Function
This function allows the phone to automatically dial the short-cut
numbers and not automatically dial emergency services.
The SOS button automatically dials the numbers registered in the
shortcut keys In sequence. If the “A” key does not answer the
phone sends an SMS with the word “Help” to this number and
then dials the number in the “B” key and again if this number does