CONTENTS I. SAFETY AND PRECAUTIONS ....................................................................................................... 2 II. CELL PHONE OUTLINE ............................................................................................................... 4 III. PREPARATIONS .......................................................................................................................... 5 IV. DESCRIPTION OF CELL PHONE..............................................................
I. Safety and Precautions To use your cell phone safely and effectively, please read the following information before use: Please turn off your phone when you are near a chemical plant, a gas station, an oil depot or other explosives. Please keep your phone out of the reach of children. To ensure safety, please use earphone during driving; Otherwise, unless emergency, you should make a call after parking your car by the roadside. Do NOT use the phone during driving at high speed.
Your cell phone has photo and record functions, so please use these functions following the related laws and regulations. You may violate the law and regulation if taking photo and record without authorization. Do NOT dispose the worn battery as common domestic rubbish. Please dispose the worn battery according to the specified instructions where the disposal of a worn battery is clearly specified. 〈Note〉：1.
II.
III. Preparations Installation of your SIM card You can apply for two different numbers offered by two network providers and get two SIM cards (users identify cards). With those two SIM cards, you can use various functions of this cell phone. Many parameters required for communications are stored in the SIM cards. Personal data, including the PIN (personal identification number), phonebook, SMS and other extra system services can also be stored in the SIM cards.
Note：The SIM card is a small object, please keep the card out of the reach of the child to avoid swallowing the card by accident! Installation of memory card The phone supports T-FLASH card as to expand the memory space. Please install or take out the memory card as per the following picture after shutting down the phone.
Installation of battery Please use the original-packaging battery and accessories. Store the battery well if it is not used. Please install the battery at shut down status. Note：Please follow the correct procedures as shown in the figure to prevent damage to the battery contact points. Charge the battery The new battery must be fully charged and discharged for several times to reach its best performance. Charge as soon as possible when the power is used up as over-discharge will damage your battery.
When charging, if the phone is switched on, the power quantity icon at the top right corner of the screen will twinkle and will stop twinkling and fully display when the battery is fully charged. If the phone is switch off, an icon will appear at the screen to show the battery is in charging. Note：A little heating while charging is normal.
factory or authorized by our company. Unqualified battery or accessories may damage your phone and even cause danger！ If the battery is left unused for a long time or the power is too low, it may require longer time for the charging interface to appear, please wait patiently. Note: For your safety and environment, please do not throw away the battery everywhere.
IV. Description of Cell Phone Dialing key Make or answer calls from SIM 1. Short pressing the dialing key can enter SIM 1 call log under standby status. Hang-up key & on/off key Hang-up or reject a call. Long press the key to switch off the phone under standby status. Long press the key to switch on the phone when the phone is switched off. Direction keys Move the bar or cursor. Enter appointed shortcut under standby status. OK Key Confirm an operation in menus. Number keys Input numbers or characters.
SIM card 2 SMS SIM card 1 MMS SIM card 2 MMS Battery Ringing Vibration then ring Vibration and ring Vibration Missed calls in SIM card 1 Missed calls in SIM card 2 SIM card 1 GPRS SIM card 2 GPRS Call divert activated in SIM card 1 Call divert activated in SIM card 2 Languages & Input Methods English input method is provided in your phone. For details, please refer to chapters related to language editing, where you can learn different input methods and how to switch between them.
Descriptions of nouns Making a national call The simplest way to make a domestic call is to input a phone number by numeral keys and press the dialing key. If the both SIM cards are inserted and dual SIM open, SIM card 1 dial or SIM card 2 dial would be selected by pressing dialing keys of SIM 1 or SIM 2. Note: Enable the function of LSK dialing function in the mune ―Call center / General call settings/ SIM card 2 call settings‖.
pressing the * key. Call extension of a fixed phone: phone number + P + extension number + dialing key. Make emergency calls In any country where digital GSM is used, you can make an emergency call if your phone is covered by the network (you can know about this by checking the signal strength indicator bar at the upper corner of the display of the cell phone).
V. Basic operation of cell phone Switch on Press and hold on ―ON/OFF‖ to start up the cell phone. If no password settings are given for the SIM card and cell phone, the phone will search for a network automatically, and when the cell phone registers a network, the name of the network supplier will be shown on the screen. You can now answer or make a call.
the battery, and if you do like this, it is easy to damage SIM card and may cause loss of some information. Making a call Enter the phone number in standby status, and press the calling key to call. If you want to hang up or cancel the call, please press the hook up/cancel key；When the phone is connected, you can see the holding time on the screen. Use the phonebook to make a call: Search the name/phone number saved in the phonebook, and press the calling key to call.
haven’t designated the speed dial function for that key, then you can't be successful for the call. Sending DTMF signal When you have set up the DTMF signal sending function, if you press the digit key and * and # key of the keypad during the period of conversation, it will be sent out in the form of DTMF signal to the other party. If you don't start up this function, you can't carry out the extension number calling, etc. functions probably.
notice concerning the voice messages (the center number of voice mailbox should be set up properly in advance). VI. Operation menu function 1 Messaging The SMS function is a network service. You may need to apply to the network operator first before you can send and receive a short message. Your cell phone supports the short message sending function. Short messages are sent to network SMS center first and then sent to subscribers.
You can create a message in this menu. The phone supports sending a long message having over 70 characters (character number restriction for common text messages). If a message has more than 70 characters, the message will be divided into two or more messages and sent. The following menu option functions by using left key are provided when you are writing a short message： Send to: Enter recipient Add from Phonebook Insert symbol: You can insert some symbol in common use.
4. Insert contact name: Enter contacts and insert the found name. 5. Bookmark：Enter the bookmark interface, insert the selected bookmark. Save: You can save the current message into Drafts or as a template. Details: You can check the character of the message 1.2 Inbox The received messages are saved in Inbox. You can view all received messages in Inbox. The messages of SIM card 1/2 are separately saved. You can perform the following operations: ◈ View: View the content of the message.
1.4 Outbox If you fail to send some messages which will be stored in Outbox. 1.5 Sent messages The messages that have been sent successfully are stored in SentBox, and you can implement the relative operations of the messages. ◈ View: View the content of the message. ◈ Forward: To forward the current message to the other subscriber. ◈ Delete: To delete the current message. ◈ Delete all: To delete all messages sentbox. ◈ Advanced 1. Copy to phone: To copy the current short message to phone. 2.
contact the network operator. 【Receive mode】 ：To enable/disable the Broadcast Message. 【Read message】：When the Broadcast Message has been enabled, the received message can be read after the corresponding server has been enabled. 【Languages】 ：To enable/disable the all languages of messages received. 【Channel settings】 ：To select, add, edit or delete channel numbers. 1.9 Templates Include the templates of SMS and MMS. 1.10 Message settings 1.10.1 Text message 1.10.1.
Tip: Under the standby condition, you can call the voice mailbox number by long pressing the key "1" after you have set the voice mailbox number. 【Common settings】 ：Enable or disable delivery report and reply directory. Delivery report：The network reports whether the opposite side has received the message and the time received. Reply path：To transfer the reply path to the network terminal. This function requires the support of message center. Save sent message: Set the sent message stored in Sentbox.
【Read report】 ：Enable/disable read report. 【Priority】 ：Set priority to be sent of the multimedia messages. 【Delivery time】 ： Set storage time of the message in Message Center. This setting depends on your network provider and your setting. Retrieve： 【Home network】：Immediate, reject, postponed. 【Roaming】：Same with main network, postponed, reject. 【Filter】：Set ―Anonymous sender‖ and ―Advertisement‖ to allow ro return messages. 【Read report】 ：Send, do not send, inquire.
2.4 Edit You can edit the information of the contact you have chosen. 2.5 Delete You can delete all entries of the SIM cards or phone, or delete entries one by one. 2.6 Copy You can copy all selected phone entries in SIM card 1/2, hone and memory card to each other. 2.7 Move You can move all selected phone entries in SIM card 1/2, hone and memory card to each other. 2.8 Send contact You can send contact to others by SMS and MMS. 2.9 Add to Blacklist You can add current contact to Blacklist. 2.
can make a call simply by long pressing the key 2 to 9 when this function is on. 【My Number】：You can edit or send ―My name‖ numbers. 【Extra numbers】：You can set up the SIM1/SIM2 card owner number and SOS number. 【Memory status】：Memory status: To view the service condition of the phone book storage. 【Copy contacts】：You can copy all the numbers saved in SIM1/SIM2 card and mobile phone. 【Move contacts】：You can move all the numbers between SIM1/SIM2 card and mobile phone.
Reset cost：To reset cost record of all calls. (Please enter PIN2 for this function.) Max cost：To limit the cost within specified amount of pricing unit or currency unit. PIN2 is required for setting the call cost. Price per unit：This function is supported by your network. For details, please contact your network operator. 【SMS counter】：View the quantity record of sent and received message. 【GPRS counter】： Last sent：To view the volume of data sent in last linkage.
Note: The phone automatically switches to the Headset mode when the headset is plugged, and it restores to the previous mode when the headset is unplugged. Long press the "#" key when the phone is in the standby state to switch the phone to the Mute mode. Long press it again will restore to the previous mode. 4.2 Shortcuts: 4.2.1 Shortcuts: Select any one shortcuts and press the left soft key
4.5.1 Time and date：To set the current time, date and the display format. Set the city：To set the home city. Note: This option needs application together with the auto time renewal, and needs the network support for the operation of auto time and date renewal. Set time/date: To set the current time and date. Set format: To set the time and date display format.
4.5.7 Auto update of date and time: Enable or disable auto updating of date and time. 4.5.8 Misc. settings Set the Signal LED and the brightness and time of LCD backlight. 4.6 Call settings 4.6.1 SIM card call settings： 【Caller ID】 ：Includes Set by Network, Hide ID, and Send ID. Set by network：The number of the phone will be sent as per the default mode when a call is initiated. Hide ID：The number of the phone will not be sent when a call is initiated.
Divert all data calls Cancel all divert operation is busy. Network will divert call incoming calls (requiring support of network). Cancel all the divert functions. 【Call barring】 1 Outgoing calls All calls：To restrict all outgoing calls. International calls：To restrict international outgoing calls. International calls except to home PLMN：While you are abroad, you can only call the numbers of the country (where you are) and your home country (at which your service supplier is located).
connect a phone number. 4.6.2.3 Background sound:You can set background sound during a call. 4.6.2.4 Call time display: Display the lapsed time during a call. 4.6.2.5 Call time reminder: During a call, a sound or a periodic tone sounds every minute to keep you informed of the call duration. 4.6.2.6 Auto quick end: You can set a limit time. If this function is enabled， the phone will hang up automatically when the call time reaches the set time limit. 4.
4.8.2 Phone lock: This function allows you to lock/unlock your phone. Note: the default password is ―1122‖. 4.8.3 Auto keypad lock: To unlock or lock the keypad. The time for locking keypad can be set. 4.8.4 Change Password: The default password ―1122‖ of phone, message, phonebook, calling records and privacy protection can be changed as the desired password of 4 to 8 digits. 4.8.5 Privacy Protect: To track the handset in case of lost or stolen using this function .
5.2 Image viewer The shot photos are stored in the image viewer. Descriptions of image viewer options: ◈ View: To view a photo. ◈ Browse mode: To select the mode for browsing photos. ◈ Send: Transmitting the photo file to the multimedia message as well as the Bluetooth equipment. ◈ Use as: Use a selected photo file and you can set it as follows :Wallpaper,Screen saver,Power on display,Power off display,Caller picture ◈ Rename: To rename the selected image or photo. ◈ Delete: To delete the selected photo.
◈ ◈ ◈ ◈ ◈ Rename: To rename a video file. Delete: To delete the selected video file. Delete all files: To delete all video files. Sort by: To sort video files by desired method. Storage: To select the storage directory (cell phone or memory card) for a video file. 5.5 Audio Player The operating system above WIN2000 do not need to install the drivers. When the phone is connected to PC using USB, the selected MP3 need be copy to ―My Music‖ root directory, otherwise it can’t be played.
◈ Send：Send a sound file to a relevant application via MMS. 5.7 FM Radio You can receive the FM Radio channel just when plugging earphone. 5.8 Schedule FM record Record the appointed frequency audio at the appointed time. 6 Organizer 6.1 Calendar With this function, you can view the calendar and schedule, and you can schedule with the scheduler to set the schedule and alert. Move the cursor to the desired date with direction keys, and the date will be highlighted in light blue frame.
even if the phone is switched off as long as there is enough power in the battery. Alarm time, snooze time-out and alarm tone can be set independently for every alarm. The phone will alarm when the time reaches the set time and current time and date will display on the screen. Press Stop to stop the alarm; press Sleep, the alarm will pause and alarm again at the snooze time-out.Note: Your phone support alarm clock when switching off. 6.
STK is a value added service provided by your network provider. The display of function menu may differ according to different SIM cards. 8.2 Internet service This function allows you to acquire or visit diversified services on the Internet through message or network. The services may include entertainment, weather forecast, news, financial information, ring tone download, stock market and other useful information. Some functions are provided by the network provider.
Trusted certificates: To view the trusted certificates provided by the system. 8.3 Data account： GSM data——Some account data will be provided by GSM data GPRS——Using GSM data will provide some account information 9 Games Provide you interesting and classical games. Please refer to help of the game for specific operation. Game settings: You can set some sound and vibration effect when you play games. VII.
Enter a word Under smart English input method, continuously press 2 to 9 keys for twice or more, the corresponding word will appear on the screen. For example, if you want to enter ―book‖, press the numeral keys ―2665‖, and then select the word ―book‖. You can press the 0 key to enter a space when you need. English letters and figure input You can input English letters such as A , a and digit 1 by choosing different input method ―ABC、abc、 123‖ .
IX. Appendix 1 Troubleshooting Failure The phone fail to power on SIM card error Weak signal 40 Possible cause 1、 Check that the battery is charged; 2、 Check that the battery is installed correctly. 1、 Check whether the SIM card is dirty. If the card is dirty, clean it； 2、 Reinstall the SIM card； 3、 If the SIM card is damaged, replace the SIM card. Check that the signal intensity indicator on the screen. 4 bars indicate a strong signal, and 2 bars or less indicate a weak signal.
Call initiation fails 1、You may set the Hide Caller ID but the network operator does not support this service； 2、A strong signal interference may exist； 3、You may activate the Call Barring function； 4、You may activate Line 2 but the network operator does not support this service. Battery charge fails 1、The battery may have been excessively discharged. To charge the battery, it is necessary to connect it to a charger for a certain period of time； 2、The battery may be deteriorated.
Photos shot too blurred 1、The object shot is moving； 2、Your hand shakes when the shutter is pressed. Photos shot is distorted The object shot is too near to the lens. Cannot access the service menu The standby picture can’t be displayed integrally. The SIM card may not support the service. Maybe the picture is extra of the size. X.
IMEI CB International Mobile Equipment Identity Cell Broadcast GPRS General Packet Radio Service MMS Multimedia Message service 43
