Languages: English Italian German French Spanish Dutch
User manual OUT LIMITS DSS GSM, GPRS digital mobile
Content SAFETY PRECAUTIONS ..............................................................................................................1 HEALTH & SAFETY INFORMATION ....................................................................................................................................3 GETTING STARTED: Front and rear view of OUT LIMITS…….………………………………………………………...............................................................................
Copy all……………………………………………………………………………………………………………………………………..…26 Delete……………………………………………………………………………………………………………………………………….…26 Caller groups…………………………………………………………………………………………………………………………..……26 Extra numbers………………………………………………………………………………………………………………………………26 Phonebook settings……………………………………………………………………………………………………………………….27 Caller picture………………………………………………………………………………………………………………………………..27 Caller ringtone………………………………………………………………………………………………………………………………27 2.
Security setup…………………………………………………………………………………………………………………..…….….44 Shortcuts………………………………………………………………………………………………………………………..……......45 Restore factory settings…………………………………………………………………………………………………………..…..48 5．CALL CENTER……………………………………………………………………………………………………………………..46 Call history …………………………………………………………………………………………………………………………..….46 Call settings …………………………………………………………………………………………………………………………..….48 6. Organizer ……………………………………………………………………………………………………….…………….
SAFETY PRECAUTIONS Please read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. Switch off the phone in the vicinity of chemical plants, gas stations and other locations containing explosive objects. Keep the phone far away from children. When driving, please use the hand free calling device to ensure safety. Please park the car at roadside for communication unless in emergency.
Charge the phone in well-ventilated environment and keep away from inflammable and high explosive articles. To avoid demagnetization, keep the handset away from magnetic substances, such as magnetic discs or credit cards. Wireless phones may be susceptible to interference, which can affect performance。 Use only approved accessories and batteries. Use of any unauthorised accessories could damage you or your phone and may be dangerous. Use only in the normal position as explained in the produce documentation.
SOS contact saved. HEALTH & SAFETY INFORMATION BATTERY CARE Your device is powered by a rechargeable battery. When the electric quantity is low, please re-charge the battery. In order to extend the lifetime of the battery allow the battery to run out of power before recharging. Take out the charger from AC. Do not leave the battery connected to a charger once the battery is full. Overcharging may shorten battery lifetime. Never use unauthorized charger or battery that is damaged.
All of the above suggestions apply to the phone, battery, charger, or any accessory. If phone or accessories are not working properly, take only to authorised service facilities. Do not attempt to open the phone or accessories other than as instructed in this guide. Use only the supplied or authorised replacement parts. Unauthorized parts, modifications, or attachments can damage the phone and may violate regulations governing radio devices.
OPERATING ENVIRONMENT Remember to follow any particular rules that may apply wherever you happen to be,and always turn off the unit whenever its use is forbidden, or it can cause interference or danger. Only use the units in its normal user position. This unit complies with guidelines for radiation when it is used either in a normal position against your ear, or when it is at least 2.2 cm (7/8 inch) from your body.
Pacemaker manufacturers recommend a distance at least 15 cm. (6 inches) between a mobile phone and a pacemaker to avoid the risk of interference with the pacemaker. These recommendations are in accordance with independent research and recommendations from Wireless Technology Research.
Do not place objects, including fixed or portable radio equipment in the area above the airbag or the area where it might expand. Serious injuries may be caused if the mobile phone equipment is incorrectly installed and the airbag fills with air. It is forbidden to use the unit whilst flying. Turn off the unit before you board a plane. Using wireless telecom units inside a plane can involve risk for air safety and interfere with telecommunications. It can also be illegal.
Therefore you should never rely solely on a mobile phone for very important calls such as medical emergencies. CERTIFICATION INFORMATION (SAR) This model meets international guidelines for exposure to radio waves. Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves recommended by international guidelines.
TECHNICAL SPECIFICATIONS System： GSM 900/1800 MHz 9
Network support： GPRS、WAP GPRS, WAP Size： 120*60*18mm Talk time：about 5 hours (determined by practical network condition) Standby time： about 300 hours (determined by practical network condition) Screen parameters：screen size 1.
4. End key Press and hold to switch the phone on or off End a call In the menu mode return to idle screen. 5. Navigation keys In standby, access the following menus: Up: shortcuts Down: profiles Right: Set-up of phone Left: Language choice In menu mode, scoll through menu options 6. OK key In standby, when pressing the OK key you access the menu The OK key almost has the same function as the left soft key in other interfaces 7.
9. Number keys Enter numbers, letters and special characters 10. Left side key Charger interface and an earphone interface 11 Torch key & volume key The torch can be turned on by pressing the upper side key; SOS (red botton on back of the phone) One-touch dialing emergency key 12. Volume key (below torch key) allow you to adjust the phone volume ICONS on the display The following icons may appear on the top line of the screen to indicate the phone’s status.
Alarm clock: on/off Keypad is locked New short message of SIM card 1 or SIM card 2 New multimedia message of the SIM card 1 or SIM card 2 Missed calls of SIM card 1 or SIM card 2 Ring Vibration Vibration and/or ring Ringing after vibration Headset connected 13
Bluetooth mode GPRS network Power Level Full battery power level Half battery power level Quarter battery power level Empty battery power level A power level shortage will trigger an alarm tone.
How to seal your phone properly: 1. Push the keys of the battery cover into the corresponding slots 2. Press down battery cover on the down side and make sure at the same time to also press the side edges [middle of the battery cover] until you hear a click. This will make sure that the battery compartment is sealed properly.
3. Turn the screws at the down side of the battery cover by 90 degrees 4. Make sure the charger slots cap is closed firmly (press it properly).
INSTALLING AND REMOVING BATTERY Gently push the battery into the battery slot, ensuring the metal contacts of the battery are faced upwards and in the position to be in contact with the metal contacts of the phone. Insert the battery cover by gently pushing it upward until in place.
Turn off the mobile phone before taking out the battery. Turn the screws of the battery cover 90º counter clockwise (screw slots from a vertical into a horizontal position); best by using a screw driver or a coin. into a horizontal position); best by using a screw driver or a coin.
The standby time of the mobile phone decreases with the use of Bluetooth, torch etc. The standby time of mobile phones decreases in areas with no network. Please also note that Dual Sim phones have a higher consumption than single Sim phones. Charging 1. Insert the USB charger in the multi-function jack (left upper side of the mobile phone) 2. Insert the charger plug in a power socket. 3. The battery power level icon flashes when charging; the battery power level icon stops flashing when fully charged. 4.
1. Please fully charge the battery before first using the phone. 2. Please ensure you charge the mobile phone at room temperature. 3. Avoid charging over long periods as it reduces the lifetime of the battery. 4. When battery power is low the phone can not be turned on, keep under charge until the screen resumes indication of power in the battery. 5. Make sure that the standard voltage and power match the voltage and power indicated on the charger. 6.
How To Install Before installing the phone must be turned off and not connected to battery charger or any other accessory. Gently slide downwards the SIM card into the metal slot until the card is in place. Please ensure that the cut angle of the card corresponds to the slot. Notice： SIM card 2 message settings are the same as SIM card 1 message settings.
Switch on 1. Open the phone. 2. Press and hold 3. If necessary, enter the PIN and press . Switch off 1. Open the phone. 2. Press and hold: MAKE A CALL 1. In Idle mode, enter an area code and phone number 2. Press [ ]. Press to adjust the volume: 3. Press [ ] to end the call.
over an extension set (number after P). In the course of conversation，press the left soft key to enter an options menu and execute the following operations: hold a call/ recover a call: pause／ recover current call. end a call end the current call. new call enter a new dialing interface. telephone directory: enter a telephone directory menu. Message: enter a short message menu. The multimedia message function is prohibited in the call course owing to the limitation of network occupation.
ANSWER A CALL 1. When the phone rings, press [ 2. Press [ ]. ] to end the call. Use the speakerphone feature During a call, press right soft key Press [ ] and to activate the speaker. to switch back to the earpiece. The screen displays the number of an incoming call. If the contact name of the number is stored in the telephone directory, the screen can display the contact name. The screen simultaneously displays which SIM card has been called.
4. Specify contact information. 5. Press to save the contact. Phonebook – how to search for a contact 1. In Idle mode, press . 2. Enter the first few letters of the name you want. 3. Select a contact. 4. Scroll to a number and press [ ] to dial, or press “Options” to edit contact information. 1.1 Quick search Browse the records of the telephone directory, you can quickly find the telephone directory through the input method in the interface.
the following contents: Caller picture： set individual incoming call picture for a phone number. Caller ring：select your favourite ringtone by pressing the left key and the right key. Caller groups：the edited telephone directory record can be sorted in different groups 1.4 Copy all Select all telephone directory records from the SIM card 1, SIM card 2 and the mobile phone for copy or select reverse copy operation. 1.
service calling number： SIM card 1/SIM card 2 own number (need SIM card support). SIM card 1/SIM card 2 emergency number：setting SIM card emergency dialed number (need SIM card support). 1.8 Phonebook settings 1. Memory status： inquire the capacity of the SIM card 1, SIM card 2 and the mobile phone. 2. Preferred memory location： select the SIM card 1, SIM card 2 or the mobile phone 3.
2.1 Text message Write message Enter submenu short message to write a short messages. Press ‘option’ for the following choices： Select the SIM card 1/and SIM card 2: you can execute operations of sending, saving and sending, saving, sending to contacts and group sending after ending the message.
Select message with upper or lower key; To read the SMS press ‘OK’; Press ‘option’ to chose the following functions: reply, delete, edit, forward, copy to SIM card/mobile phone, remove from SIM card/mobile phone, delete all, copy all, remove all, using number, using USSD and chatting. Outbox Enter the outbox to check the short messages saved on SIM card/mobile phone.
column and press ‘edit’ to set mode name, short message center number, short message expiry date and sending format. Notice：message expiry date, fax, messenger call and E-Mai functions needs to be supported by your network operator. state settings: turn on or cancel message sending report and reply path. memory status: display the current memory space for SMS left on SIM card and mobile phone. Preferred storage location： select to save on SIM card or mobile phone.
Message>MMS>Write message you can find the following options: To(Recipient Number), CC(Carbon Copy), BCC(Blind Carbon Copy), Subject, Editing Content. You can directly input recipient’s phone numbers by “edit” option and add the numbers or emails, or you can press ‘Search’ to select a phone number from the Phonebook List. Press “OK” to return to the “Recipients”.
Add slide before: new page can be inserted before the last page. Add slide after: new page can be inserted after the last page. Preview： preview multimedia messages. Slide timing： set the preview interval time of the multimedia message contents. When editing the MMS, following options are shown: Done: MMS content is finished. Cancel: MMS content is cancelled.
When there is an new MMS, phone will show “New MMS (SIM Card 1/2)”, press to read. If sending to email box, users have to go to webmail to check the MMS. Outbox Users can save the MMS here, and can edit the MMS by “Checking, Fowarding, Editing, Delete, Delete All, Save as a Template, Message Details, Using Details” Display fail delivered MMS. Drafts Display message draft list.
send settings： you can set validity period, delivery report, read report, priority, slide time and delivery time. Retrieve settings： you can set Home network, roaming network, read report and delivery report. Filter： you can set anonymous and advertisement message. Server profile: select multimedia message network settings on the SIM card 1 and the SIM card 2. (select and set as your operator’s MMS) Memory status：you can check the memory status of the MMS. 2.
Read message: read the received message Language: use to set the language for receving the message. Channel Settings: Choose, Increase, Edit or Delete channel numbers. 3. SOS 3.1 Setting Please note: This key remains active when keypad is locked BUT must be pressed for at least 2 seconds. For the set-up: Press the up/down key to choose the various options below. Press the right soft key to exit without modifications.
set the short message text content and the on/off state of the short message . This means the mobile phone automatically sends a message to your set number when the mobile phone experiences exceptional impact or drop, and the short message contents can be set in advance. 3.3 Auto alert：Set on/off for automatic alarm in case the mobile phone detects exceptional impact or drop. The mobile phone reacts according to the settings of the emergency call i.
(2) Customize： includes setting up ringtones, volume etc. Ringtone settings： press the up or down key to select the ringtone, the mobile phone will play the selected ringtone, and the left soft key is to confirm the selection. Volume settings： set the ringtone volume; the default standard ringtone volume is level 3. Alert Type：select the incoming call alert mode, which includes ringtone only, vibration only, vibration and ringtone, ringtone after vibration.
volumes. 4.1.5 Earphone mode The mobile phone automatically switches to the earphone mode when an earphone is inserted, please refer to general mode settings for the specific setting. 4.1.6 Bluetooth mode The mobile phone automatically switches to the bluetooth mode when the bluetooth earphone is conneted with the mobile phone, please refer to general mode settings for the specific setting. Press # key for a long time when standby to switch between the mute mode and the general mode. 4.
With this option you can set the time and date, schedule power on/off, language, preference input method, display characteristics, Greeting text, Dedicated Key, Auto update of date and time, and backlight settings 1. Time and date： including home city setting，time/date setting，format setting. 1) Set Home City Press up and down keybutton to choose the city. 2) Set time/date Set the hour and minutes in the first text, and set the date in the second text. 3) Time/date format 12 hours format or 24 hours format.
Settings>Phone setup>DisplayCharacteristic>Screen saver, Screen saver>settings, use to define the status. If the status is “On”, you can use to set the waiting time of 5 sec / 15 sec / 30 sec / 1 min. If the status is “Display time”, your phone will show the time as the screen saver instead of showing the screen saver image. Screen saver>select>system, select the images from system as the screen saver image Screen saver>select>user defined, select the images from telephone memory as the screen saver image.
on. 7) Dedicated key：Settings>Phone setup>Dedicated Key, define different shortcuts with different functions for up, down, left and right navigation keys when in standby mode. 8) Auto update of date and time: Settings>Phone setup>auto update of date and time, Press left button to set on or off. Auto update of date and time service needs network support. 9) Misc. settings: 1. Set the brightness and the lighting time of LCD backlight, 2. Auto adjust backlight. Press left button to set on or off.
4.4.1 Power Settings>Bluetooth, Press left button to set on / off activatation of Bluetooth. 4.4.2 Inquiry audio device Settings>Bluetooth>Inquiry audio device Search all bluetooth devices. When the screen displays the searched device list, choose one device for connecting and pairing. The code needs to be inserted when matching. The device will be listed in the device list after pairing.
from an unknown device. In this way, you can better protect your device from harmful content. Change device name：Edit the name shown to other devices using Bluetooth wireless technology. Authentication：Press left button to set on, Connection requests from this device must be accepted separately every time. Or set off, — Connections between your device and this device can be made without your knowledge. No separate acceptance or authorisation is needed.
SIM Card 1 Security Setup Encrypt some functions of SIM card 1, which will be useful to pretect your mobile phone or SIM card from being embezzled. Password input is required, press “OK” after entering correct password which will be shown as “*”. Please press “Clear” to clear the codes and re-type the correct password, if input was wrong. In this setting, you can change the PIN code and PIN2 code. SIM card 1 lock Based on this option, you can lock or unlock the SIM card 1 with correct PIN code.
codes. SIM card 2 security settings Encrypt some functions of SIM card 1, which will be useful to protect your mobile phone or SIM card from being embezzled. You can set up for SIM card 2 as well: lock, fixed dial, change PIN codes. The procedure is the same as for SIM card 1 security settings. Phone lock This option can set a password to the phone to lock or unlock the phone. When you set the phone password, you need to input the code first when you switch on the phone.
4.8 Restore Factory settings Some setting parameters in the mobile phone can be changed to default settings after the restore. The default code is 1122. 5）CALL CENTER 5.1 Call history SIM card 1 call records and SIM card 2 call records. You can check information of the call records, which includes: missed calls, dialed calls, received calls, delete call records, call timer, call charge, short message counter and GPRS flow. 5.1.
Delete SIM card 1 call logs This option is for deleting the missed calls logs, dialed calls logs, received calls logs Choose “delete call logs” > ”Delete all”, you can delete all the call logs. SIM card 1 call timers Last call: display the calling time of last call Dialled calls: display the quantity for all the dialled calls Received calls: display the time for all the received calls Reset all: clear the call logs on SIM card 1.
5.1.2 SIM card 2 Call history Same as SIM card 1. 5.2 Call settings A： SIM card 1 call settings Call ID You can choose “set by network”, “Hide ID” and “Send ID”, it needs the support from the network operator. If you choose “Send ID”, your phone number will be shown in other’s phone when they receive your call; If you choose “Hide ID”, it prevents your number from being displayed by the other party.
Call restriction For, “Call restriction”, has to be activated through your network operator. He’ll provide the network code, only then you can use the related function of the call restriction. Every item of the “call restriction” can be set switch on, switch off and search.
Restrict all incoming calls including the roaming call. When you switch on this function the user will not receive any call. The operation is the same as above “resctric dial-up” Start-up all Press ok key, enter code, switch on all the restrictions of SIM1. Cancel all Cancel all set call restrictions. Code change: Enter previous call retriction Enter a new restriction code. Remark: When you apply for this function, you will get a code from the operator.
Speed dialing Create your speed dialing list; you can set 8 speed dialing numbers. By pressing numbers 2 to 8 for a long time in the idle mode you dial your set numbers directly. Call time display Turn on and turn off the funtion to display the call time. Call time reminding turning off: turn off the function. one tone: the phone will remind you when entering any number between 1 and 3000. Cycle: input any number between 30 to 60 seconds, and the function prompts the call time in cycle (in seconds).
6.2 Services 6.2 .1STK service The service content is determined by user’s card and the local operator. 6.2.2 WAP You can connect your mobile phone with the mobile phone WAP Internet at any time. Please ask your network operator for his WAP parameters. 1. In the idle mode press the function key to access main menu. 2. Select ‘network service’→‘WAP’ option by the left key and the right key Press the function key to enter: A．homepage Enter the default homepage.
The mobile phone automatically records some visited websites (webpage history) D．Offline pages Save webpage addresses. E．Input address Enter the target webpage address and press the function key to browse the webpage. F．service inbox The network inbox of the mobile phone receives public network information. G．Settings 1. Select SIM card: select the SIM card with internet service, also set as ‘always ask’. 2. Edit setting column： 3.
6.3 Head lamp You can turn on the mobile phone torch through this function, or by pressing the button on the rightern side of your mobile phone. 6.4 Head lamp key mode 1. short press switch: controle the side key, you can turn on/off the torch light. 2. long press switch: long press the right side key and keep one second, you can turn/off the torch ligh. 6.5 Calendar The function is used for checking dates.
The fucntion is used to save memos like appointments, telephone calls, memorial days etc. You can set the ring prompt time of the mobile phone as a reminder. Select appointment, telephone number etc for adding and editing by pressing the OK function key. 6.7 Alarm The function is used to set an alarm. Press the alarm clock function key to enter the function (you can set 5 alarms maximum) Press the upper or lower key to select alarm clock and press the edit key to enter settings. 1.
Notice：the precision of the calculator is limited due to rounding errors. 6.9 World Clock You can view the current time of other major cities in the world, and you can select the “Daylight saving time for foreign city “ if you need. 7. INPUT METHOD Summarize The mobile phone supports input of intelligent English, numberS and symbolS. Keypad definition Please refer to the input method explanation about the keyboard definition in the input method state.
Navigation keys (up key, down key, left and right keys): generally used for moving the cursor or selecting words to be selected. *key: used for symbol selection in text editing. Number keys (2-9) represent the letters on each key Number keys (1-6) represent stroke on each key in the state of stroke input method; # key: used for switching different input methods.
* key # key: Press * key to enter into symbol input box Switch input method Use the keypads to input General operation of English input: Each key is used for entering more letters. Press the keys quickly and repeatedly till your required character appears. Press * key to enter a special symbol like punctuation etc. Switch input method by # key. Press 0 key once in the state of capital or lowercase when you need a space.
selection. Select and input English letters: upper and lower navigation keys rolls the screen, left and right navigation keys find English words to be selected, and OK key selects the English words. Select English phrase association words: association input will give the phrase association of the last word, the upper and lower navigation keys are used for scrolling the screen, left and right navigation keys find English words to be selected, and OK key selects the English words.
If you’re having problems with your mobile phone, please consult the following ‘trouble shooting list’.
failure Invalid key operation Part of calls are not reached Can’t find contacts No number in the phonebook PIN code error Auto-lock code error Mobile phone power-off automatically Dialling error Redial Fee limits Accidental interference Contact with the operator Take out the battery and assemble it after 1 minute Beyond the telephone number of digits Check with the phone number Setting problems Check whether ‘call restriction’ is set or not The SIM card is changed Use the original SIM card Setti
Accidental interference No warning tone with incoming call 62 Volume is set to mute Reset suitable volume again
