User manual

5
-The # key and the * key represent different functions in each menu.
-Hold the # key up to 2s to switch between normal and vibrate mode in standby.
-Pressing the * key to select a symbol in edit mode.
-Long press * key can input "+" in standby mode. "+" are used for dialing an international call.
6. Getting started
6.1 Installing the USIM/SIM cards and the battery
USIM/SIM cards carry useful information, including your mobile phone number, PIN (personal
identification number), PIN2, PUK (PIN unlocking key), PUK2 (PIN2 unlocking key), IMSI
(international mobile subscriber identity), network information, contacts data, and short messages
data.
Note: After powering off your mobile phone, wait for a few seconds before removing or inserting
USIM/SIM cards.
Exercise caution when operating USIM/SIM cards, as friction or bending will damage the
USIM/SIM cards.
Properly keep the mobile phone and its fittings such as the USIM/SIM cards beyond children‟s
reach.
-Hold the end key for a while to power off the mobile phone
-Unscrew the lock and remove the battery cover. (Do not user your fingernails to unscrew. Use a
coin or screw driver instead.)
-Insert the card into the USIM/SIM cards slot.