Outlimits 3G User Manual V.2.
Contents 1. Safety......................................................................................................................................... 2 2. Handle your phone carefully and sensibly ................................................................................ 3 3. Important! Concerning your PHONE IP67 feature .................................................................... 3 4. Phone overview .........................................................................................
1. Safety Read these guidelines, do not follow these illegal or dangerous usages. Read the complete user guide for further information. Switch on safely Do not switch on device when wireless device usage if prohibited or the use may cause danger and interference. Traffic safety first Please comply with local laws, driving with both of your hands and minding road security firstly. Interference All wireless devices may get performance decline because of interference.
2. Handle your phone carefully and sensibly Your phone has been tested in a controlled environment and shown to be dust and water resistant in certain circumstances (meets requirements of classification IP67 as described by the international standard IEC. Despite this classification, your phone is not impervious to water damage in any situation). Improperly sealed covers, extended immersion in water, and/or excessive pressure may cause leaks and allow water to enter the phone.
4. Failure to completely close the battery/SIM cards compartment cover may leave it exposed to water. Make sure that the compartment cover is securely closed. 4. Phone overview 1. Front camera 4. Screen 7. Navigation key 10. Player/cancel key 2. Earpiece 5. Left soft key 8. Ok/select key 11. End/power key 3. Flash light switch 6. Send key 9. Number key 12. Right soft key 13. Battery cover screw 16. Earphone/Charging plug 14. Rear camera 15. Speaker 5.
-The # key and the * key represent different functions in each menu. -Hold the # key up to 2s to switch between normal and vibrate mode in standby. -Pressing the * key to select a symbol in edit mode. -Long press * key can input "+" in standby mode. "+" are used for dialing an international call. 6. Getting started 6.
-Insert the battery.
-Replace the battery cover and tightly screw the locks. Note: To ensure phone is waterproof, screw in the cover tightly, make sure the cap is closed tightly. 6.
-Unlock the memory card cover -Lift the memory card cover and insert a memory card with the label side facing up. -Close and lock the memory card cover. Note: The mobile phone cannot automatically identify the T-flash card being inserted when the mobile phone is powered on. You must power off the mobile phone and then power it on, so that the phone can identify the T-flash card. 6.3 Using code Phone lock code The phone lock code may be set to prevent your mobile phone from being misused.
this code is provided along with the mobile phone by the manufacturer. The initial phone lock code is set to 0000 by the manufacturer. If the phone lock code is set, you need to input the phone lock code when powering on the mobile phone. PIN The PIN (personal identification number, 4 to 8 digits) code prevents your USIM/SIM cards from being used by unauthorized people. In general, the PIN is supplied with USIM/SIM cards by the network operator.
-Install the battery into the mobile phone before charging the battery. -Connect the adapter of the travel charger with the charging slot in the mobile phone. Ensure that the adapter is fully inserted. -During the charging, the battery level grids in the battery icon keep flickering till the battery is fully charged. -Power off the mobile phone before removing the battery.
-Make a video call from contact 1) Select contact on main menu to enter contact list. 2) Scroll through the list by pressing up and down key. 3) Select option on screen to enter sub-menu 4) Select video call on the sub-menu. 5) Press to dial the video call. -Make a video call from call log 1) Select call log on main menu to enter call log management. 2) Pressing left/right key to switch among catalogs: answered, missed, dialed, all calls and most used.
With Bluetooth, you can make a wireless connection to other compatible devices, such as mobile phones, computers, headsets and car kits. You can use the Bluetooth to send images, video clips, music, sound clips and notes, and transfer files from your compatible pc. Bluetooth settings 1) Press ok key to access main menu 2) Press left soft key to select settings to enter its sub-menu (settings page). 3) Select Bluetooth to continue.
1) Select video camera on right soft key during standby mode to activate it to enter video camera mode. 2) Select Menu to enter Multimedia-Video camera. This function enables you to record dynamic pictures. Adapt the VCR to the scene or the figure, the press ok to start recording. Press left soft key to select „stop‟ to end recording. For more operation, please refer to the usage of camera. 1) In Capturing mode, select options to enter video mode and exit sub-menu. 2) To record video, by pressing OK key.
Install: Install a new application from your T-Flash Card root folder; Delete: Delete the selected installed applications; Information: Show the selected midlet Information; About: Show the information of Java version; Brew version; Release date; Total space and Available space. 9.4.2 Network settings Select the supported network from your network operator.
number is correct. 9. Internet account information. Input your ISP account ID and code. (Please contact your ISP if you forget your current ID and code. 10. It‟s done for the new connection guide. 9.6 Messages Select messages on main menu to enter message interface 9.6.1 Message -Write message You can type a message or insert a pre-defined message from “templates”. While writing a message, select “options” to access all the messaging options. You can save your messages that you send often to “drafts”.
3) After switching to target catalog, you can scroll through the list by pressing up and down key. 4) Focus on the contact name you want.(if you want to send a video call, please first make sure that it‟s a video call number, otherwise, you can just send voice call to this contact and no video call choice on menu for you.) 5) Press send key to dial Delete call log 1) Select call log on main menu to enter call log management.
Message—transfer this contact information via message, the contact name and number will be sent as the message content. Pull-mail—transfer this contact information via pull-mail Bluetooth—transfer this contact information via Bluetooth. 9.10 Organiser 9.10.1 Alarm Three alarm clocks are set but deactivated by default. You can activate one, multiple or all of them as needed. For each alarm clock, time, alarm sound and alarm volume can be set.
9.11.3 Outdoor Select to activate the Outdoor mode in the options. 9.11.4 Indoor Select to activate the Indoor mode in the options. 9.11.5 Headset Plug in earphone to activate the Headset mode. 9.11.6 Bluetooth Connect to Bluetooth headset to activate this mode. 9.11.7 Flight mode Select to activate the flight mode in the options. Flight mode will disable all wireless activity, including calls, Internet, messaging and Bluetooth. 9.11.8 Power save Select to activate the power save mode in the options. 9.
9.12.8 Advanced -Language settings -SIM1 call settings -SIM2 call settings -Security settings (Set for protecting your phone or main card from been illegally used under this menu.) -Memory details -Master reset, restore the settings to default. 10. Appendix Appendix 1：Troubleshooting If you find exceptions when operating the mobile phone, restore the factory settings and then refer to the following table to solve the problem. If the problem persists, contact the distributor or service provider.
Calls cannot be dialed The mobile phone cannot connect the network The battery cannot be charged Call barring is activated Cancel call barring The USIM/SIM Cards is invalid Contact your network service provider The mobile phone is not in a service area of the GSM network Move to the network operator's service area The signal is weak The charging voltage does not match the voltage range indicated on the charger An improper charger is used Poor contact Move to a place where the signal quality is hig
