Operation Manual

14
Dial an Extension Number
After entering the operator’s number, press the key
“*” three times , the screen shows a “p” symbol, then
enter the extension number, and press the Send Key to
call out.
Re-dial the Last Outgoing Number
1) In Idle mode, press the Send Key to display the
outgoing calls.
2) Use the Up/Down key to select your desired
number.
3) Press the Send Key to dial the number.
Direct Dial (M1/M2/M3) :
1) Set the speed-dialing numbers of M1, M2, M3 key
in the Settings first.
2) Press the M1, M2 or M3 key dirctly to dial the
number in Idle mode.
Dial SOS Number
1) Set the numbers of SOS1, SOS2, SOS3 in the
Settings first.
2) Long press the SOS button for 3 seconds to start the
function, it will send the SOS message to the phone of
the first number and then dial it/to the first phone
number, If it can’t connect to it successfully, then to
the next, till to the last number./if it doesn’t conect