Contents I、Safety and Precautions .................................................................................................................................. 2 II. Cell Phone Outline ......................................................................................................................................... 4 III. Preparations..................................................................................................................................................
I、Safety and Precautions To use your cell phone safely and effectively, please read the following information before use: Please turn off your phone when you are near a chemical plant, a gas station, an oil depot or other explosives. Please keep your phone out of the reach of children. To ensure safety, please use earphone during driving; Otherwise, unless emergency, you should make a call after parking your car by the roadside. Do NOT use the phone during driving at high speed.
Please use your phone in an environment which is neither too hot nor too cold, and do not expose your phone to the strong sunlight or use in high-humidity environment. Do NOT use liquid or wet cloth with strong detergent to clean your phone. Your cell phone has photo and record functions, so please use these functions following the related laws and regulations. You may violate the law and regulation if taking photo and record without authorization.
II.
III. Preparations Installation of your SIM card You can apply for two different numbers offered by two network providers and get two SIM cards (users identify cards). With those two SIM cards, you can use various functions of this cell phone. Many parameters required for communications are stored in the SIM cards. Personal data, including the PIN (personal identification number), phonebook, SMS and other extra system services can also be stored in the SIM cards.
accident! Do not touch the metal surface of the SIM card and keep it away from electromagnetic fields to avoid loss and damage on the data. You will not be able to connect to the network if the SIM card is damaged. Installation of memory card The phone supports T-FLASH card to expand the memory space. Please install or take out the memory card as shown in the following picture after shutting down the phone.
Installation of battery Please use the original-packaging battery and accessories. Store the battery with care if it is not used. Please install the battery at shut down status. Note：Please follow the correct procedures as shown in the figure to prevent damage to the battery contact points. Battery charge The new battery must be fully charged and discharged for several times to reach its best performance. Charge it as soon as possible when the power is used up as over-discharge will damage your battery.
When charging, if the phone is switched on, the power quantity icon at the top right corner of the screen will blink and will stop blinking and fully display when the battery is fully charged. If the phone is switch off, a static icon will appear on the screen to show the battery is charging and “OK” will be displayed on the screen when the battery is fully charged. Note：A little heating while charging is normal.
To optimize the performance of the battery, please do as following regulations： New battery or a battery left unused for a long time should be charged for a long time； Keep the temperature at or near room temperature when charging； The battery may require longer time to be fully charged after being totally discharged and this is normal. If the call time becomes too short, you may need to buy a new battery produced by original factory or authorized by our company.
consult the network supplier right away to unblock it. Unauthorized unblocking may cause permanent failure to the SIM card. IV、Description of Cell Phone Dialing key Make or answer calls. Quickly press the dialing key to enter call log under standby status. Hang-up key Hang-up or reject a call. On/off key Keep the key pressed to switch off the phone under standby status. Keep the key pressed to switch on the phone when the phone is switched off. Slide key Adjust the volume when you play MP3/MP4.
SIM card 2 MMS Battery Ringing Vibration then ring Vibration and ring Vibration Missed calls in SIM card 1 Missed calls in SIM card 2 SIM card 1 GPRS SIM card 2 GPRS Bluetooth Call divert activated in SIM card 1 Call divert activated in SIM card 2 Languages & Input Methods English input method is provided in your phone. For details, please refer to chapters related to language editing, where you can learn different input methods and how to switch between them.
Vibrating then ringing How to make calls Making a national call The simplest way to make a domestic call is to input a phone number by numeral keys and press the dialing key. If calling by SIM card 1, the screen will display “SIM Card 1 Dialing”, and if calling by SIM card 2, the screen will display “SIM Card 2 Dialing”. Call status will display on the screen when the call is answered. Press the hang-up key to end the call. Make domestic calls: zone number + phone number + dialing key.
Make emergency calls In any country where digital GSM is used, you can make an emergency call if your phone is covered by the network (you can know about this by checking the signal strength indicator bar at the upper corner of the display of the cell phone). If your network operator does not provide roaming service in that area, the screen will display "EMERGENCY CALLS ONLY", telling you that you can make this kind of call only.
V、Basic operation of cell phone Switch on Press and hold “ON/OFF” to start up the cell phone. If no password settings are given for the SIM card and cell phone, the phone will search for a network automatically, and when the cell phone registers a network, the name of the network supplier will be shown on the screen. You can now answer or make a call.
the battery. By doing like that it is easy to damage SIM card and cause loss of information. Making a call Enter the phone number in standby status, and press the calling key to call. If you want to hang up or cancel the call, press the hook up/cancel key；When the phone is connected, you can see the connection time on the screen. Use the phonebook to make a call: Search the name/phone number saved in the phonebook, and press the calling key to call.
： To speed dial, you have to press and hold a key for 2 seconds and above, and if you haven’t designated the speed dial function for that key, then no call will start. Call Hold If you have applied for the waiting call extra service, the following function menu may appear when you click an entry during conversation： Hold: Temporarily suspend the current conversation, but the conversation channel keeps under connection. End: End the current connection.
VI、Operation menu function Communication 1 Messages 1.1 SMS The SMS function is a network service. You may need to apply to the network operator first before you can send and receive a short message. Your cell phone supports the short message sending function. Short messages are sent to network SMS center first and then sent to subscribers. If the subscriber does not turn on the phone or cannot receive messages (storage is full), the network will keep this message temporarily.
more messages and sent. Input method of “English Edit Instruction” can be implemented under message editing interface. The following menu option functions by using left key are provided when you are writing a short message： Select SIM card 1/2：Enter sending method option and send the message. Insert： 1. Templates：Select frequently used sentences from the template and insert into message editing interface. 2.
Reply: To reply to a received short message. Delete: To delete the current message. Use Detail: Collect some contents of the current short message, such as the number of user and using website. Forward: To forward the current message to the other subscriber. Copy：To copy the current short message or all short messages. When the message is stored in SIM cord, it can be copied to the phone storage. When the message is stored in phone storage, it can be copied to the SIM cord.
network operator. 【Common settings】：Enable or disable delivery report and reply directory. Delivery report：The network reports whether the opposite side has received the message and the time of delivery. Reply path：To transfer the reply path to the network terminal. This function requires the support of message center. 【Memory Status】：Check memory space use of SIM card or mobile phone. 【Preferred Storage】：Select the directory to save messages (SIM cards or mobile phone).
【Subject】：Edit the subject of a multimedia message. 【Edit content】 ：Edit the content of the text of the multimedia message. This includes the following options: Done：Finish the message editing. Input method：To select the input method to edit a multimedia message. Add picture：To insert an image to the multimedia message. Add audio：To insert an audio file to the multimedia message. Add video：To insert a video file to the multimedia message.
Detail: To view the detailed information of the current multimedia message. Use item: Store or dial the number of the received MMS, and edit new multimedia message. 1.2.3 Outbox You can view a multimedia message that failed to be sent. Possible operations are viewing, forwarding, deleting, deleting all, store in template, viewing message details and using item. 1.2.
【Priority】：Set priority to be sent of the multimedia messages. 【Slide timing】：Set play time of each page. 【Delivery time】 ： Set storage time of the message in Message Center. This setting depends on your network provider and your setting. Retrieve： 【Home network】：Immediate, reject, postponed. 【Roaming】 ：Same with main network, postponed, reject. 【Read report】：Send, do not send, inquire. 【Delivery report】 ：Enable/disable delivery report.
SIM card 1/2 voice mail server： Edit：To edit voice mail name and server number. Press OK to store your number. Connect to voice：To dial the voice mail server number stored in your voice mail server number list. Tip: When the phone is in standby condition, you can call the voice mailbox number by pressing and holding the key "1" after you have set the voice mailbox number. 1.
By inserting the contact initial in viewing phone number interface, you can quick search the number record of the phone number list. 2.2 Search contact You can find the best matching record by entering the name to be searched and then pressing “Search” in the Phone book. 2.3 Add new contact To add a new entry to the phone or SIM card. Description： If picture link, ring link, incoming call group, video connecting are set in a record simultaneously, the incoming call group function will be invalid. 2.
groups. 3 Call history SIM card 1/2 calling record, including: 【Missed calls】 ：To view the list of missed calls (requiring network service support). 【Dialed calls】：To view the list of calls you dialed or tried to dial. 【Received calls】 ：To view the list of the last 20 answered calls (requiring network service support) 【Delete call log】 ：To delete call history. You can select to delete all numbers in call history, or only delete the numbers listed in Missed Calls, Dialed Calls or Answered Calls.
【GPRS counter】 ： Last sent：To view the volume of data sent in last connection. Last received：To view the volume of data received in last connection. All sent：To view the volume of data sent in all connections. All received：To view the volume of data received in all connections. Reset counter：To reset the GPRS counter. 4 MSN After you logon to MSN and keep online, you can chat with other end-user. For details, refer to the “Help” menu.
【Bookmarks】：Visit or edit the bookmark. 【Recent pages】 ：Record the recently visited web addresses. 【Offline pages】：View the saved web pages. 【Input address】 ：Provide user-defined inputting web address. 【Service inbox】：Save the PUSH messages received by the phone. 【Settings】 ：Set parameters of WAP browser. Please refer to your network provider for details about the parameters. Select SIM：Those options include “always inquire, SIM card 1 and SIM card 2”.
8 Yahoo You can sign in Yahoo web. Multimedia 1 Audio player Don’t power-off the phone when downloading songs. When the phone is connected to a PC, it will display USB setting interface. Press the “Storage device” option, then the PC will display the message “found new hardware” and update one mobile Disc. The selected Music has to be copied into “My Music” root directory, or it can’t be played. (The phone only supports the music in MP3,AMR and MIDI format).
them with the right software! When the phone has insufficient memory space for new photos, you should delete some old picture or other files in the "File Manager" function list to release memory space for new pictures. 【Photos】：To view a saved photo. 【Camera settings】 ：To set the corresponding parameters of the camera. 【Image settings】：To set the corresponding parameters of the photo to be shot. 【White balance】：Adjust the white balance. 【Scene mode】 ：Setting the scenario mode of the camera.
View: To view a photo. Browse mode: To select the mode for browsing photos. Transfer: To transfer a photo to the desired application. Rename: To rename the selected image or photo. Delete: To delete the selected photo. Delete all: To delete all photos. Sort: To sort photos by the desired method. Preferred storage: To set the storage directory for photos. 6 FM You can receive FM Radio channels only when earphone is plugged in.
Delete: To delete the selected video file. Delete all: To delete all video files. Sort: To sort video files by desired method. Preferred storage: To select the storage directory (cell phone or memory card) for a video file. Bluetooth setting：Enable or disable Bluetooth stereo output and select Bluetooth stereo earphone. 8 Recorder 8.1 Video recorder Press the red icon bottom of the screen or press OK key to start or pause video recording.
Delete all: To delete all recorded files. Settings: To set the Preferred Storage, File Format and Quality for recorded files. Forward：Forward a sound file to the selected application. 8.3 Schedule FM record Record the appointed frequency audio at the appointed time. Organizer 1 World clock View the corresponding to the time zone of countries in the world, choosing by the direction keys. 2 Alarm The time format of the alarm clock is the same of the clock.
3.2Add task：Edit new item for a schedule. 3.3Jump to date：Move the cursor directly to the specified date. 3.4 Go to weekly view: To view the set schedules by week or month. 4 Calculator Eight operators, i.e. “+”, “-”, “×”, “÷”, “m+”, “m-”, “mc”, and "mr”, are provided. Choose the Clear or press the right icon key to clear items entered. Keep pressed Clear or the right icon key to clear all content. Press the “Ok” to show the result of calculation.
Open: To open an E-book. Update: To Update an E-book. System presetting: To set the attributes of an E-book. Information: To view the attributes of a text. Delete: To delete a text. Delete all: To delete all texts. Sort: To sort the E-books in a folder. Apply: To apply the settings. Help: To open E-book help description. 8 Stop watch Your phone supports typical stopwatch and multifunctional stopwatch. You can time, time by lap and view records, etc.
2 Display settings 2.1 Display characteristic Wallpaper：Set the background picture in standby screen interface. Power on Display：Can select the picture that shows as your power on animation. Power off Display：Can select the picture that shows as your power off animation. 2.2 Greeting text State：To set the greetings on the main screen when the phone is powered on. Greeting text：Press to edit the greeting text. 2.3 Misc. settings Set the brightness and bright time etc.
2 Hide ID：The phone number will not be sent when a call is initiated. If the system doesn't support this function, it may not make a call. 3 Send ID：The phone number will be sent when a call is initiated. Note: This function requires network support. For details, please refer to your network operator. 【Call waiting】 ：To set functions like activate/deactivate call waiting.
Cancel all divert Cancel all the divert functions. 【Call barring】 1 Outgoing calls All calls：To restrict all outgoing calls. International calls：To restrict international outgoing calls. International calls except to home PLMN：While you are abroad, you can only call the numbers of the country (where you are) and your home country (at which your service supplier is located). 2 Incoming calls： All calls：To restrict all incoming calls.
A. Single：Add a single number into the red list. B. Group：Add all numbers in an appointed group into the red list. C. No Number In Phonebook：Add all numbers saved in SIM card or the phone into the red list. 【Time Splitted Firewall】：You can set a certain period to enable the firewall. 5.2.2 Auto redial： To set the auto redials as “On” or “Off”. When your dial doesn't succeed, the phone will perform up to 10 redials trying to connect a phone number. 5.2.
correspond to the location the display “feels” the touch. Touch screen should be calibrated regularly. 6.2.2 Handwriting settings: Set the spead and the color of handwriting. 6.3 Schedule power on/off：To set the designated phone On/Off time. Caution: In particular area (such as airplane compartment) where use of a cell phone is forbidden, you shall verify that the Schedule Power On/Off function is disabled to avoid an accident. 6.4 Language: To select the used language for the phone. 6.
6.10 Sound effect setting: Set the sound effect when play audio. 6.11 Restore Factory Settings You can restore some settings of the phone to factory settings. To restore the factory settings, enter the password. The default password is “1122”. 7 Safty setup 7.1 SIM card 1/2 security setup 7.1.1 SIM 1/2 lock：To unlock or lock SIM (PIN). 7.1.2 Fixed dial：This function may need the support of SIM card and network operator.
【Settings】 ：Setting the parameters when Bluetooth is connected. Visibility: Enable/disenable. Device name: Change the displayed name of this phone device Authentication: Enable/disenable. Audio path: Set voice to the phone or to hand free device. Location of store：Set the path of transmission. File transmission setting: Set the directory and privilege of the directory. 【About】：Introduction of the Bluetooth device. VII.
Symbol input Press * key to into the interface of inputting symbol, when the phone not under the interface of symbol. Transfer direction keys to move the cursor to desired symbol, press OK key to select it. VIII. Application of USB storage function Precautions before using Please maintain correct operation of USB equipment connection and disconnection.
IX. Appendix 1 Troubleshooting Failure The phone fail to power on SIM card error 44 Possible cause 1、 Check that the battery is charged; 2、 Check that the battery is installed correctly. 1、 Check whether the SIM card is dirty. If the card is dirty, clean it； 2、 Reinstall the SIM card； 3、 If the SIM card is damaged, replace the SIM card. Weak signal Check that the signal intensity indicator on the screen. 4 bars indicate a strong signal, and 2 bars or less indicate a weak signal.
Battery charge fails 1、The battery may have been excessively discharged. To charge the battery, it is necessary to connect it to a charger for a certain period of time； 2、The battery may be deteriorated. Cannot connect to the network 1、Check whether the signal is too week or wireless interference exists around； 2、Check whether the SIM card is installed correctly, poor connection exists, or the SIM card is damaged. If the SIM card is damaged, please contact the network operator.
X.
