Dear Customer, Thank you for purchasing the mobile phone. Kindly read this user manual carefully to learn about key functional characteristics and operational methods of this mobile phone. The mobile phone is a dual SIM, dual standby phone that supports high-speed Internet through GPRS and enables you to surf on the WAP network with comfort and ease. It also has T-Flash (storage) card slot for carrying all the extra data you need.
.1 KEY ARRANGEMENT ....................................................................6 2.2 SCREEN........................................................................................9 2.3 STATUS ICONS ............................................................................10 3. START TO USE .................................................................. 10 3.1 OPEN & CLOSE BATTERY DOOR..................................................10 3.2 INSERT SIM CARD ......................................
4.5 MAGIC CALL .............................................................................23 5. MENU GUIDE ..................................................................... 24 5.1 SETTINGS .................................................................................24 5.2 CALL CENTER ...........................................................................30 5.3 USER PROFILES ........................................................................35 5.4 MULTIMEDIA ...............................
Please read these instructions carefully and follow them implicitly in case of any dangerous or illicit situations. Note driving safety It is strongly recommended that you do not use a mobile phone when driving. Please use the personal hand free package when a call is inevitable. Please put your mobile phone in the mobile phone holder safely, and don’t put it at a passenger’s seat or any other place that may risk a drop of your mobile phone in the case of collision or emergency brake.
rules specified by the hospital. Make sure your mobile phone is switched off when medical equipment is nearby. Any wireless transmission equipment, mobile phones included, will affect its performance. Other electronic equipment may be affected as well. If you have any question in this regard, please consult relevant doctor or equipment supplier directly. Interference Any interference caused by wireless equipment can do damage to its performance.
Make sure your mobile phone is powered on and is in the service, if you would like to make an emergency call number such as 112, pressing the dial key and confirm your location, simply explain what has happened, and don’t terminate the call without any permission. Note: Like any mobile phone, it may not be supported due to the network coverage and wireless signal transmission. What’s more, some networks even don’t support the 112 emergency call services.
Power key Ending a call. Pressing this key to switch on or off your mobile phone. Return to the standby mode or cancel the current operation under the function list mode. Soft key Use it to execute an operation that corresponds to the last line of characters. Navigation key Use it to roll the function list or options in the phone book. Use it to roll the cursor under the edit mode. Use it to enter corresponding functions with respective keys under the standby mode.
Number keys Used it to do some transfer among numbers, letters, and some special characters. Holding the # key to start or cancel the mute mode under the standby mode. Press the Left key+ * key to lock or unlock the keypad under the standby mode. Pressing the # key to switch the input method under the editing window. Press corresponding number keys for fast switch between settings of corresponding functions under the shoot preview status.
When slide down the phone, you can see four shortcut keys: Play a forward file. Audio player Stop file. shortcut key Play or stop the current file. Play next file. 2.2 Screen This is a single-screen mobile phone.
2.3 Status Icons Ringtone status： vibration ----Ring -----Vibrate -----Ring and vibrate 3. Start to Use 3.
1. Hold the phone and press the clip. 2. Remove the battery door.
CLOSE: 1. Fix the battery door through insert into the two hole. 2.Push and press the top of battery door to fix it.
3.2 Insert SIM Card PIN (personal identification number), PIN2, PUK (personal unlock key), IMSI (international mobile subscriber identification) number, network information, phone book and SMS (short message service) and other data are stored in your SIM card. Steps: 1 Hold the power key to turn off your mobile phone, and remove the battery door and then the battery. 2 Note: don’t pull out the extractor when inserting the SIM card. Firstly, inserting the side with the unfilled corner.
3 Put the battery into the battery holder again, and close the battery door.
3.3 Insert T-Flash (Storage) Card 1 Hold the power key to turn off your mobile phone, and removing the battery door and then the battery. 2 Pushing the T-Flash card carefully with the metal surface downwards and move it into the groove of the T-Flash card holder. 3 Put the battery into the battery holder again, and close the battery door. 3.4 Battery & Charge Indication of battery power Your mobile phone can monitor and display relevant information on the battery.
is inadequate. If you have selected the prompt tone of any mode out of the scene modes, the mobile phone will also give out a warning prompt tone. 3 When the battery is charged, the power indicator of the battery icon will be constantly changing until the battery is full. Note: The actual standby time and calling duration are related to the use of the mobile phone, the local network environment, the SIM card and actual settings.
Points of attention on use of battery 1 Be sure to switch off the mobile phone before you remove the battery. 2 Please use it carefully. A short circuit will occur if the positive pole (+) and the negative pole (-) of the battery is connected with a metal object (for example, a coin or clip), it may do damage to both the battery and the metal object.
11 Don’t use the li-ion battery when the temperature is extremely low, for the maximum standby/call time is not available at a low temperature. 12 Don’t clean the battery with water or organic solvent, or immerse the battery in water. 13 Make sure the battery is fully charged if it has been out of use for a long period. 14 It is recommended that the rejected battery be returned to the mobile phone manufacturer or placed in a designated public area for rejected battery recycling.
password, first press the Clear soft key to delete the wrong information, and then provide a correct password. You may follow the instruction “Settings->Security settings>Change password” or “Settings->Security settings >SIM1/SIM2 security settings ->Change password” to change the PIN code, the PIN2 code as well as the mobile phone lock password. Mobile phone password The mobile phone password is the same as the mobile phone lock password, which could prevent unauthorized use of your mobile phone as well.
4 If the PUK code is correct, the SIM card will be unlocked, and the PIN code is reset. Warning: If you have entered the PIN code incorrectly for three times, the SIM card will be locked automatically, in that case you need to use the PUK code to unlock the card. The PUK code is generally kept by the network operator. PUK code The PUK code (the PIN unlocking password, 8 digits) is used to unlock the locked PIN code. The PUK code is provided by the manufacturer together with the SIM card.
to unlock the locked PIN2 code. The PUK2 code is provided by the manufacturer together with the SIM card. If the PUK2 code has not been provided, please contact your network operator. If you have entered the PUK2 code incorrectly for ten times, you will be unable to use the functions of the PUK2 code. If you want to use these functions, please contact your network operator to change a new card. Prohibition password When you operate the call restriction function, the prohibition password is needed.
Dial an extension After you have entered the phone number of a switchboard, press the * key three times consecutively, and you will see the “P” symbol, or press the * key four times consecutively and you will see the “W" symbol, and then enter the extension number and press the dial key. Correct a wrong input Pressing the right soft key to delete the wrong information . Redial a previous number Press the dial key to enter the dialed record list, and press it directly to make calls.
Call waiting If this function is available and you have already activated it, you can hear the call waiting tone if there is an incoming call during the call. If you choose” answer the incoming call”, press the dial key or left soft key, the first call will be automatically held while you are answering the incoming call. See the Hold/Switch section. Hold/Switch When an incoming call is held on during another ongoing call, you can press the left soft key to switch between them.
sound effect from the voice you have chosen. 5. Menu Guide Here we have listed the available functions, after browsing you will have a good understanding of how to operate your mobile phone. 5.1 Settings Dual SIM settings Dual SIM open: When you select this mode, two SIM cards can access to the net at the same time. Only SIM 1 open: When you are in this status, only SIM 1 is available to surf the net. Only SIM 2 open: When you are in this status, only SIM 2 can be online.
user. By replying to that alert SMS message, the user can access the currently replaced SIM card number, and perform remote control through sending the following code to the mobile: (1) remote shutdown and lock the phone: #CLOSE#password. (2) long-range clear the telephone book: #CLEARPHONEBOOK#password. (3) remote get phonebook: #GETPHONEBOOK#password. The password is the one you set for the Anti-theft system. Phone settings Time and date: 1> Set home city: select a city.
mobile phone or those downloaded themselves as the wallpaper. 2 Screen saver: Set the screen saver photo and the time. Firstly setting the screen saver status at ON, then setting the time, lastly selecting a screen saver photo or 3D cartoon. Users can use either the photos provided by the mobile phone or the photos or 3D cartoons downloaded themselves as the screen saver. 3 Power on display: Users can use either the photos provided by the mobile phone or those downloaded themselves as the start cartoon.
This function can be set at ON or OFF. Note: It is related to the local network whether the automatic time update function is supported. Misc.settings: LCD backlight: Set the duration and brightness of the LCD backlight. Network settings SIM1 network settings: Setup the SIM1 network; please contact your network operator to get the following network services: Network selection You can determine the network selection mode when the phone is in the roaming state here: Automatic selection/Manual selection.
Select the preferred network operator. The default network operator is the one that provides the SIM2. Security settings You can use PIN1 code, PIN2 code, keypad lock, phone code to protect the phone’s various functions. SIM1 security settings: SIM1 lock: Inputting the PIN code is required. Only correct PIN code is provided then the lock can be set. If the SIM card lock is set at ON, inputting the PIN password will be required when the mobile phone is started each time.
numbers on the fixed dialing list. Setting this function requires you to enter the PIN2 code, which needs your network operator to support. Change password: It is used to change the SIM1 PIN code, the PIN2 code. SIM2 security settings: SIM2 lock: Inputting of the PIN code is required. Only after a correct PIN code is inputted then the lock can be set. If the SIM card lock is set at ON, inputting of the PIN password will be required when the mobile phone is started each time.
Phone lock: It is used to lock and unlock your mobile phone. If the mobile phone is locked, inputting of the mobile phone password will be required when the SIM card is changed. The default phone lock password is 1122. Auto keyboard lock: It is used to lock and unlock the keyboard of your mobile phone. User can press left soft key + *key to lock or unlock the keypad.
With it, you can check the record of recent missed calls in SIM1 or SIM2. 2.Dialed calls: With it, you can check the record of the recent dialed calls. Entering this interface and then selecting a dialed number. 3.Received calls: With it, you can check the record of the recent answered calls in SIM1 or SIM2. Entering this interface and then selecting an answered number. 4.
transmissions and receipts, and reset the counter. Call settings SIM1 Call settings Caller ID: You may choose from the system preset number provided by your network operator, the hidden number and the sent number. The ex-factory default status of the mobile phone is the system preset number.
5> Divert all data calls: Forwarding of all incoming calls needs the support of the network operator. 6> Cancel all diverts: This function is used to cancel various forward functions, i.e. to set a forward function at OFF. Call barring: 1 Outgoing calls: All calls: When this function is on, no calls can be made. International calls: When this function is on, no international calls can be made.
5 Change barring password It is used to change the barring password. Entering the original restriction password requires changing of the password. Line switching: It is used to switch between Line 1 and Line 2. The default line is Line 1. Note: If Line 2 is selected, whether you can dial out calls or not is related to the local network. Closed user group: Internal groups are divided by the network operator.
1 Enable speed dial: you can set eight numbers for speed dial. When it is on, you can long press number key to call the number at standby mode. 2 Set number: it can display number list that you have set. Call cheater: With it, you can set the background sound function On or Off as such the call receiver will hear the preset background sound during a call. There are 10 preset background sound effects for selection and user is also able to make 10 other background sounds by himself.
1 Activate 2 Customize: Tone settings: Ring tone setting including: the ring tone for incoming calls, power on, power off, messages and keystroke. Users may choose either the ring tones preset in the mobile phone or edited by users themselves or downloaded. Volume: Including the volume setting of the ringing tone and key tone. Alert type: a Ring only: Ring only and no vibration in case of an incoming call. b Vib. only: Vibration only and no ring in case of an incoming call. c Vib.
successful network search. Connect: A prompt tone generated after a calling connection. Answer mode: Cover answer: It is used to answering an incoming call by sliding up the phone. d Any key: It is used to answer an incoming call by pressing any key, except the right soft key and the hang-up key. Meeting See the "general" section for details. Outdoor See the "general" section in details. Indoor See the "general" section for details. Headset Insert the earphone automatically to enter the headset mode.
5.4 Multimedia Camera Press left soft key to enter camera preview, and press left soft key again, you can see the following items: Photos: 1 View: Browsing a selected photo file. 2 Browse style: You can check photos either with the list mode or the matrix mode. 3 Use as: Use a selected photo file and you can set it as follows: the wallpaper, the screen saver, the start cartoon, the switched off cartoon and the phone book as well.
compensation +0.5, compensation +1, compensation +1.5, and +2. You may adjust the exposure value for higher photo quality in line with the actual situation of the ambient light source. 3 Anti-flicker: Available selections including 50Hz and 60Hz. 4 Delay timer: Press the number 4 under the shoot preview status for fast switch of settings. You can choose whether to delay the shooting, and the shoot delay time. 5 Cont. shot: Press the number 5 under the shoot preview status for fast switch of settings.
special effects. Storage: The storage card or phone can be selected. Restore default: Select this operation to resume the factory parameters of the camera. Imager viewer It provides you with the function of checking the picture file quickly. You will be familiar with the operation of accessing to the photo album provided in the camera function section. Note: Thus, the user should save the photo file in an external storage of the mobile phone or the [Photo] folder of the storage card.
photo in line with the actual situation of the ambient light source. 3 Night mode: Press the number 4 for fast switch of settings under the video shooting preview status by selecting or closing this function. 4 Anti-flicker: Available selections including: 50Hz and 60Hz. Video settings: Set video quality, Available options including: normal, low and high. Effect settings: Press the number 1 under the shoot preview status for fast switch of settings. You can select from a number of special effects.
Note:This player supports the AVI video formats. This player only puts the video files stored in the [Video] folder into the play list. Therefore, the user needs to store the video file into the external storage of the mobile phone or the [Video] folder of the storage card. Audio player The music player providing the play/pause, stop, previous and next buttons, which respectively is corresponding to the up, down, left and right keys of the navigation key.
you may not play newly added music. Thus, it is recommended that you set it at ON. Repeat: You can choose out of close, single and all. Shuffle: You can choose the ON/OFF status of the random playing. Background play: If it is set at ON, the music playing will continue after the music play interface exits (the music playing will stop in the case of an incoming call). At the same time, you can adjust the volume with the side key.
memory card or phone. FM radio Before using the FM radio function, please insert the headset. During FM radio playing, press OK key you can start recording, and press left soft key, you can select following functions: 1. Channel list: list or edit all user saved or predefined channels. 2. Manual input: enter the numbers of one channel and play it directly. 3. Auto search: auto-search all the valid channels and update them to the channel list. 4.
SMS Write message Press the # key to switch the input method when editing a short message. 1> You can select out of the following options: SIM1 done: To complete editing of a short message. SIM2 done: To complete editing of a short message. Input method: Select current input method. Insert templates: Phrases preset in the mobile phone when it leaves the factory. Insert object: Inserting a picture, cartoon, and melody as well as a ring tone. Text format: Enter to set the text style, alignment and paragraph.
SIM2 Inbox: display the message of inbox in SIM2. Press the “option” soft key to read short messages. You can choose out of the following options: Reply: Reply to a short message received to the sender in line with the phone number contained in the short message. Delete: Delete a short message. Forward: Forward the original message to a desired destination. Copy to phone: Copy a short message to the mobile phone. Move to phone: Move a short message to the mobile phone.
message. 3 Press the “option” soft key to read a message, and you can choose from a plurality of functions, sending, editing, deleting, and copying to mobile phone, moving to mobile phone, deleting all, copying all, moving all and extracting number are included. Templates The mobile phone stores a number of common phrases as templates. User can edit or delete these phrases. SMS settings The SIM1 and SIM2 have the same menus.
MMS Write message When writing a message, you can select the receiver, the copy, the blind copy, the subject and edited contents. To: The receiver may be a phone number or an email address. CC: Copy the multimedia message to a mobile phone number or an email address. BCC: Copy the multimedia message as a blind copy to a mobile phone number or an email address. Subject: Set the subject of the multimedia message.
The sender, the copy, the subject, the date, the size of the multimedia message and other information are included. Outbox Enter the Outbox, and press the left soft key to choose out of the following options: View: View this multimedia message. Forward: Forward this multimedia message to other destination. Edit: you can edit the multimedia message. Delete: Delete this multimedia message. Delete all: Delete all the multimedia messages in the outbox.
message and other information are included. Templates The mobile phone stores a number of common phrases. The user can edit or delete these phrases. MMS Settings Profiles It is used to set the network required by multimedia messages. Please contact your network operator for details on how to configure the network setting. Common settings Compose: It is used to set the creation mode, picture resizing, auto signature and signature text.
Voicemail server In “Message” menu, you can choose “Voice mail server” to entry this function. The SIM1 and SIM2 have the same menus. Call voicemail: use this function you can listen to the voice mail. Edit: edit voice mail number. Broadcast message Note: It is related to the local network whether the function is supported. Receive mode: Set ON or OFF. Read message: Read the broadcast message that you have received. Languages: Choose the language that you want.
Games There is one game: Puzzle. You can play it by reading game help. Game settings: Including game background voice, sound effect, volume, and the ON/OFF setting of the game vibration. E-book reader It supports the .txt-format text, and the default value is the txt files under the [E-Book] directory. Services WAP 1> 2> 3> 4> 5> Homepage: Default web address of the Internet. Bookmarks: Storing the frequently web addresses. Recent pages: Storing the recent web addresses. Offline page: Browse recording.
Calendar When you enter the options, there are some submenus: 1> View: view the event that you add. 2> View all: view all the event that you add. 3> Add event: you can add event by this function. 4> Delete event: you can delete event by this function. 5> Jump to date: jump to the data that you want. 6> Go to weekly view: you can choose Go to monthly view or Go to weekly view mode.
or the Bluetooth equipment, or save it as a file. Save as file: Save the memorandum to Phone or Memory card Alarm Press the left soft key to select the alarm clock entering the alarm clock interface. Five alarm clocks in total, and the default value of each alarm clock is off. Select an alarm clock, edit the alarm clock by using the touch kit or pressing the left soft key, and carry out relevant settings. World clock It enables you to check the current local time in different regions throughout the world.
height and weight then press OK key to check you BMI. The health result will indicate you are: Thin, Normal or Fat in accordance with your input figures. Stopwatch: With it, you can use your mobile phone as a stop watch. Available modes including: a Typical stopwatch, and a nWay stopwatch. Bluetooth Activate/Deactivate Bluetooth equipment To activate the Bluetooth equipment: -> Bluetooth -> Power.
5.8 Phonebook The mobile phone can save up to 1000 phone numbers, and the number of phone numbers that the SIM card can store depends on the storage capacity of the SIM card. Quick search Use this function you can find the number that you want to search quickly. And you can change the input mode by pressing # key. Search contact This function allows you to find the desired contact quickly. Add new contact This function is used to add new phone numbers to the phone book.
Caller groups This function enables you to setting the name, the incoming ring tone, the incoming call picture, the video link and member for each group. Extra numbers This function is used to set the local mobile phone number, this function can help you to set owner number, service number and SOS number. Phonebook Settings Memory status: Display the used space and total space of the phone books of the mobile phone and the SIM card. Preferred storage: Set the location to store newly added numbers.
To caller group: Set the photo as the incoming call photo for an incoming call group selected. Caller ringtone Set the ring tone for incoming calls. After a ring tone is selected, the following options are available: To new contact: Set the new call record, and set the ring tone as the incoming call ring tone. To selected contact: Change an original incoming call ring tone. To caller group: Set the ring tone as the incoming call ring tone for an incoming call group selected.
User is allowed to choose out from open, new folder and format functions. The handset can support up to 2GB T-Flash card. Open This allows user to list the root folder and files of the storage card.
7 8 9 Move: Move a designated file to a designated location; Delete: Delete a selected file; Delete all files: Delete all the files under the directory where the designated file is located; 10 Sort by: Sort the files in the storage card to display them by name, type, time, size and none after sequencing. New folder With this function, you can create a new folder in a designated location. Format With this function, you can format all the data in the storage card.
power, and if yes, please charge the battery. Unable to connect network Display messages at start Poor calling quality Weak signals. Please retry in a place with strong signals. Beyond the network coverage of your network operator. Invalid SIM card. Please contact your network operator. Check whether the SIM card has been correctly inserted. Locked. You have selected the automatic locking function, and entering the mobile phone password before using it. Enter PIN.
example, the time to go to and leave work, and line congestion makes it impossible to call. Short standby time SIM card error Unable to dial out The standby time is related to the system settings of the network, and the mobile phone is possibly in an area with poor signals. When it fails to receive signals, the mobile phone will continuously transmit to look for a base station, thereby consuming a lot of battery power and leading to a shorter standby time.
Caller unable to contact you Unable to charge Unable to set some functions function has been activated. Please confirm whether the fixed calling function has been activated. Please check whether you have connected your mobile to the network. Please confirm whether you have paid the telephone bill. Please confirm whether the SIM card is valid. Please confirm whether the call barring function has been activated. Please confirm whether the fixed calling function has been activated.
added into new versions of instruction manual without any prior notice. The product appearance and color are subject to the actual appliance. The colour of the mobile phone in the sales package may differ from that shown in this user manual and on the packaging. Enhancements may vary by market. Please check with your local dealer. Specifications are subject to change without prior notice.
