Operation Manual

Connecting Lines
Installing Batteries
Shaker Icon
Indicates the shaker and visual ringer is enabled.
Signal Icon
Indicates whether the current signal exists or not. If the handset is too far from the
base, this icon will blink on the LCD.
Alarm Icon
This icon appears when you set an alarm to ring at a specified time.
Keypad Lock
This icon appears when the keypad is locked.
1. Connect one end of the phone line cord to the phone
line jack of the base, and the other end to a standard
phone wall outlet.
2. Connect the modular end of the AC power adapter to
the power jack of the base, then plug the AC adapter
into a standard AC wall outlet.
To phone wall outlet
To AC wall outlet
The rechargeable Ni-MH batteries (AAA size, 1.2V,
600mAh) come with your phone. Install the batteries
before use.
1. Slide the battery cover in the direction of the arrow
and pull it out.
2. Insert new batteries as indicated, matching correct
polarity (+,-).