Operation Manual

You can select to change the dial mode by the following steps:
1. Press the Menu soft key.
2. Press or key repeatedly to choose BS Settings, and press the Select soft key.
3. Press the key to choose Dial Mode, then press the Select soft key.
4. You can press or key to select the required dial mode options (Tone/Pulse) and
press the Save soft key. A confirm beep will be heard.
Note:
If you are not sure which dialing mode should be selected, please contact your local service
provider.
Handsfree
During a call, you may turn on the speakerphone built in the handset. In this mode you can
simply put your handset on a surface (e.g. a desk) and enjoy the comfort of the handsfree
conversation.
To turn the feature on, press the key during a call (line engaged). The icon appears on
the LCD.
To turn the feature off, and keep on talking in normal mode, press the key again. The
icon will disappear.
Notes:
Before putting the handset near your ears, be sure you have turned the speakerphone off.
To adjust the speakerphone volume, see par. Adjusting Audio Volume.
Flash Signal
When the line is engaged, pressing the Flash soft key sends the Flash signal. This key is used in
conjunction with special services (e.g. call waiting) which can be available in your phone
network. For further details please contact your network telephone company.
To use the said special services, just press the Flash soft key while the line is engaged: the
display will show R.
Advanced F
unctions