Datasheet

Cannon VG/CA-Bayonet
9
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Modification 01 – metric crimp contacts
(only for CA......-B) 02 – adapter for heat shrink boots
AWG crimp contacts
03 – adapter for heat shrink boots,
metric contacts
04 – rear mount, thread in flange,
metric crimp contacts
05 – trear mount, through holes in flange,
(CA3100, CA 3102,
CA 20, TBF)
06 – shrink boot adapter, thread holes
in flange, solder pot contacts
08 – angular endbell, through holes in
flange (for CA3100 only)
09 – angular endbell, through holes in
flange (for CA3100 only)
13 – shielded version, solder contacts
14 – shielded version, metric crimp con-
tacts
15 – shielded version, AWG crimp contacts
41 – shielded version, heat shrink boot
adapter
32 – endbell for shielded system cable acc.
MTV 6145-005
109 – F80, rear mount, thread holes in
flange (for CA3100 only)
111 – rear mount, thread holes (CA3102
only), solder contacts
F80 – AWG crimp contacts
A232 – Zinc cobalt black
A233 – Zinc cobalt green
F42 – less grommet and backshell
F0 – less contacts, contacts to be
ordered separately
see pages 51– 52
Important!
When connectors are requested according to VG 95234
modification, e.g. with another finish, with other contact arrange-
ments and solder contacts, they are to be ordered only with the ITT
Cannon order reference.
Connectors acc. to VG95234 are generally available with insert po-
sitions X and Y only.
VG order reference with modification is not possible.
With Spring Washer and Friction Ring
These connectors feature a spring washer and a friction ring
under the coupling nut.
Advantage Vibrations are being compensated
Ordering example according performance class insert
„W“ after Class E, F or R
CA06EW – connector with spring washer, endbell
with cable and bushing
CA06FW – connector with spring washer, endbell
for flex tube
CA06RW – connector with spring washer and short
endbell
CA08EW/FW – connector with spring washer and
9
0° endbell
The connectors acc. to VG95234 are generally delivered with
spring washer.
Other Shell Styles
CA3100E-B-02/03/06 – adapter for heat shrink boot
CA3100F-B-08/09 – 90° endbell for flex tube
CA3100E-B-08/09 – 90° endbell, cable clamp and bushing
CA06PG-B – PG adapter
CA3101F-B-08/09 – 90° endbell flex tube
CA02L-B – receptacle with pcb solder contacts
CA20L-B – rear mount receptacle with pcb solder
contacts
CA07A-B – jam nut receptacle
CA00EP-B-TL – TINEL-LOCK adapter
CA06EW-B-TLXX – TINEL-LOCK adapter