Datasheet
6
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Cannon VG/CA-Bayonet
Mounting Holes
Mounting holes for wall mounting receptacles style A, B1, B2,
C1, C2, J1, J2, N1 and N2 acc. to VG95234, or CA 3100E/F/R-B
and CA 3102 E-B.
S
hell ø d1H12 ø d2H13 e screws to be used
size Style A Style B1, B2 Style Style ±0,15 A, B2, C2, J2, B1, C1, J1, N
CA 3102E-B C1, C2, J1, J2 A, B2, C2, B1, C1, J1, N1 N2 CA 3100E, F
N
1, N2 J2, N2
CA 3100E, F, R-B CA-B CA 3100E, F, R-B CA-B-Mod. 05
TBF-B/-05 Mod-05
10SL 16,4 18,5 3,4 4,5 18,2 M3...DIN 85 M4...DIN 84
1
2S 16,4 21,7 3,4 4,5 20,6 M3...DIN 85 M4...DIN 84
14S 19,7 24,9 3,4 4,5 23,0 M3...DIN 85 M4...DIN 84
16S 22,9 27,7 3,4 4,5 24,6 M3...DIN 85 M4...DIN 84
16 22,9 27,7 3,4 4,5 24,6 M3...DIN 85 M4...DIN 84
18 26,1 31,1 3,4 4,5 27,0 M3...DIN 85 M4...DIN 84
20 29,5 34,5 3,4 4,5 29,4 M3...DIN 85 M4...DIN 84
22 32,7 37,8 3,4 4,5 31,8 M3...DIN 85 M4...DIN 84
2
4 36,0 41,3 3,9 4,5 34,9 M3,5...DIN 85 M4...DIN 84
28 42,0 47,1 3,9 5,5 39,7 M3,5...DIN 85 M5...DIN 84
32 48,3 53,8 4,5 5,5 44,5 M4...DIN 85 M5...DIN 84
36 54,6 60,0 4,5 5,5 49,2 M4...DIN 85 M5...DIN 84
*
When used with safety elements the max. outer diameter must not exceed the outer diameter of the screw head.
Harnessing
VG95234 connectors are designed for single wire harnessing.
Full sealing will be guaranteed only by using wires in accordance
with MIL-W-5086, LN 9251 (for AWG) and TL 6145-009 and TL
6145-011 (for metric wires). All other wires have to conform to
wire and insulation diameters with the data given in the follow-
ing table:
Contact size Crimp- and solder contacts Insulation Ø
AWG metric AWG metric AWG metric
mm mm
2
mm
– 10 – 0,75-1,0 – 1,45-2,5
16S/15S 16/15 16 0,75-1,5 1,6-2,8 1,60-2,8
12 25 12 2,5 2,9-3,5 2,9-3,5
– 60 – 6,0 – 3,5-4,9
8 100 8 10,0 4,2-5,8 5,5-6,5
4 160 4 16,0 6,2-9,0 7,1-9,0
0 500 0 50,0 10,5-13,0 10,5-13,0
Wire Stripping
Either mechanical or hot stripping can be used. Prevent
conductor or insulator damage. For solder contacts, conductors
have to be pretinned.
Note: Do not twist conductors used with crimp contacts. Do not
touch uninsulated conductors before crimping. Twisting of
conductors and grease or lubricants on the wires cause poor crimp
quality.
Contact size Stripping length
AWG metric mm
– 10 4,0 + 0,4
16S/15S 16/15 6,0 + 0,5
12 25 6,0 + 0,5
8 60/100 11,0 + 0,8 – 0,4
4 160 11,0 + 0,8 – 0,4
0 500 13,0 + 0,8 – 0,4