Datasheet

4
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Cannon VG/CA-Bayonet
Electrical Data
Contact rating at 68 °F (+20 °C)
Contact size max. current
A
10 8
16S/15S 22
1
6/15 22
12/25 41
8/60/100 74
4/160 135
0/500 245
Current rating
depending on ambient temperature
Contact resistance
(Millivolt test)
The contact resistance has to be tested according to VG95234
part 2, test no. 5.10.1 and VG 95210, part 37. The measuring
points are indicated in the illustration.
Operating voltage and connector usage
Connectors in equipments must not be separated or mated
under load when used per specifications.
As according to specification the connectors are suitable for an
operating voltage of 50 V (see Product Safety Information).
However, this is only valid, when the connectors are freely
accessible during operation and consequently might be
touchable. When the connectors will be operated with line
voltage, please contact ITT Customer Service.
Contact size Max. contact
resistance
metric AWG mΩ
10 – 12
15S/15 16S/16 6
25 12 3
60/100 81
160 4 0,5
500 0 0,2
Insulation resistance
Acc. to VG95319, part 2, test no. 5.12 and VG95210, part 32,
test condition B
Standard insulator material > 1000 MΩ
FKM insulator material (upon request) > 5000 MΩ
Test voltage
Acc. to VG95319, part 2, test no. 5.13 and VG 95210, part 31
Test voltage for service rating:
Service rating Test voltage V
rms
Instruments 1050
A 1600
B 4000
D 2500
E 3000
Air and creepage paths (min.)
Voltage class Instr. ADE
Air and creepage paths mm 0,7 1,1 2,8 4,8