Datasheet

12
www.ittcannon.com
Dimensions shown in mm
Specifications and dimensions subject to change
Cannon VG/CA-Bayonet
Mo di fi ca tion 01 – metric crimp contacts
(only for CA......-B) 02 – adapter for heat shrink boots
AWG crimp contacts
03 – adapter for heat shrink boots,
metric contacts
04 – rear mount, thread in flange,
metric crimp contacts (CA3102 only)
05 – rear mount, through holes in flange,
(CA3100, CA 3102, rear mounting
CA 20, TBF)
06 – shrink boot adapter, solder pot
contacts
08 – angular endbell, through holes in
flange (for CA3100 only)
09 – angular endbell, through holes in
flange (for CA3100 only)
13 – shielded version, solder contacts
14 – shielded version, metric crimp con-
tacts
15 – shielded version, AWG crimp contacts
32 – shielded endbell, reduced cable entry
diameter
41 – shielded version, grounding spring on
barrel
109 – F80 contacts, rear mount, thread
holes in flange (for CA3102 only)
111 – rear mount, thread holes (CA3102
only), solder contacts
F80 – AWG crimp contacts
A176 – gold plated contact, see pages 58-59
A232 – Zinc cobalt black plating
A233 – Zinc cobalt green plating
A240 – Zinc Nickel plating, blue iridescent
F42 – less grommet and backshell
F0 – less contacts, contacts to be
ordered separately, see pages 58-61
Important!
When connectors are requested according to VG95234
modification, e.g. with another finish, with other contact arrange-
ments and solder contacts, they are to be ordered only with the ITT
Cannon order reference.
Connectors acc. to VG95234 are generally available with insert
positions X and Y only.
VG order reference with modification is not possible.
With Spring Washer and Friction Ring
These connectors feature a spring washer and a friction ring
under the coupling nut.
Advantage Vi bra tio ns are being compensated
Ordering example according performance class insert
„W“ after Class E, F or R
CA06EW – connector with spring washer, endbell
with cable and bushing
CA06FW – connector with spring washer, endbell
for flex tube
CA06RW – connector with spring washer and short
endbell
CA08EW/FW – connector with spring washer and
90° endbell
The connectors acc. to VG95234 are generally delivered with
spring washer.
Other Shell Styles
CA3100E-B-02/03/06 – adapter for heat shrink boot
CA3100F-B-08/09 – 90° endbell for flex tube
CA3100E-B-08/09 – 90° endbell, cable clamp and bushing
CA3100F-B-08/09 – 90° endbell flex tube
CA02L-B – receptacle with pcb solder contacts
CA20L-B – rear mount receptacle with pcb solder
contacts
CA06EH – H stands for FKM insulator and sealing
material. FKM is a high temperature
material good for up to 200°C/392°F
plus an extraordinary performance
against oils of the various nature. (The
full range of end bell styles can be
utilized).
CA07A-B – jam nut receptacle
CA00EP-B-TL – TI NEL- LOCK adap ter, contact factory
CA06EW-B- TLXX – TI NEL- LOCK adap ter, contact factory