Datasheet

ManualsBrandsITT Corporation ManualsCircular ConnectorsCable connector male 3P

Cannon

CA Bayonet Connectors

In Accordance with VG95234

IP69K Compliant

Summary of content (68 pages)

PAGE 1
Cannon CA Bayonet Connectors In Accordance with VG95234 IP69K Compliant
PAGE 2
Dimensions shown in mm Specifications and dimensions subject to change 2 www.ittcannon.
PAGE 3
Interconnect Technologies & Solutions For over 90 years, ITT has been developing innovative solutions for harsh environment applications. We have a proven track record of demonstrating our expertise and commitment to the industrial industry, offering the broadest portfolio of interconnect products. Our interconnect range include sealed circulars, plastic and metal shell bayonet coupling circulars, miniature metal shell circulars, PC Board header connectors and sensor and direct device connectors.
PAGE 4
Connector Series Selection Table Sure Seal CLC SLC SLE APD Trident Rectangular Trident Circular Military - - - - - - - Standards/Associated Specifications - SAE J2030 USCar SAE J2030 USCar SAE J2030 USCar ISO 15170 UL 1977 NFF 61-030 (TFR) UL 1977 EN 61984 MIL-DTL-5015 VG 95342 2 to 10 2 &4 5, 8, 10 & 15 19 & 28 1 to 51 2 to 36 4 to 48 1 to 65 250 V AC 250 V AC High Voltage: 500 V DC/AC 50 V DC MS E/F/R General Industrial/Commercial Number of Circuits Electrical Max.
PAGE 5
CA-INDUSTRIAL CA Triple Thread CGL - - - VG 95234 - ISO 16750 VG 95234 DIN/VDE 0627 5.4.
PAGE 6
Cannon CA Industrial Introduction Connector Design Cannon CA-Bayonet series was designed in accordance with the VG95234 specification. This versatile and highly reliable connector series is an improvement on the well established MIL-C-5015 series. CA-Bayonet has a proven “reverse bayonet” coupling design that offers exceptional vibration protection, by a simple 120° turn. Due to the rugged shell made of an aluminium alloy, these connectors withstand most severe conditions.
PAGE 7
Cannon VG/CA-Bayonet Technical Data Contact resistance (Millivolt test) Contact rating at 68 °F (+20 °C) Contact size 10 16S/15S 16/15 12/25 8/60/100 4/160 0/500 The contact resistance has to be tested according to VG95234 part 2, test no. 5.10.1 and VG 95210, part 37. The measuring points are indicated in the illustration. Max. current A 8 22 22 41 74 135 245 Contact size Metric 10 15S/15 25 60/100 160 500 Current rating Depending on ambient temperature Max.
PAGE 8
Cannon VG/CA-Bayonet Mechanical Features Coupling torque Ambient temperature Standard insulator material –55°/125°C (– 67/257°F) The allowable coupling torques have to be tested under full bundle conditions of the connectors to VG95319, part 2, test no. 5.8.2. FKM insulator material* –30°/200°C (– 22/392°F) Shell size Safety provisions** In mated condition General (All connectors): IP67 acc. to .
PAGE 9
Cannon VG/CA-Bayonet Mounting Holes Mounting holes for wall mounting receptacles style A, B1, B2, C1, C2, J1, J2, N1 and N2 acc. to VG95234, or CA 3100E/F/R-B and CA 3102 E-B.
PAGE 10
Cannon VG/CA-Bayonet Separating and Mounting Dimensions When using connectors according to VG95234 the below mentioned installation dimensions have to be met. Connector style D or CA3106E-B and CA3106F-B CA3106F-B-13/-14/-15 Connector style G, M, R1 or CA3106E-B-02/-03/-06 CA3106E-B-13/-14/-15 and CA3106E-B-32 with shrink boot, straight, acc. VG95343 Connector style E, E1 and K or CA3108E/F-B and CA3108F-B-13/-14/-15 Connector style G, M, R1 or CA3106E-B-02/-03/-06 CA3106E-B-32 with shrink boot 90° acc.
PAGE 11
Cannon VG/CA-Bayonet How to order How to order VG Order reference Cannon Order reference VG95234 A – 32 – 6 S 1 N CA 3106 E 18 – 1 Series Series Shell style Shell style Dash Class Shell size Shell size Contact arrangement Contact arrangement Contact type Contact type Contact termination Insulator position Insulator position Connectors with bayonet coupling Explanation Dash Series VG95234 Modification Shell style J1, J2, N1, N2, S1, U1, U2 – wall mounting receptacle F – cable c
PAGE 12
Cannon VG/CA-Bayonet Modification 01 (only for CA......
PAGE 13
Cannon VG/CA-Bayonet Contact Arrangements View on Mating face of Pin Insulator  No. of Contacts Contact arrangement Contact size VG CA Service rating 3 10SL-3 15S 10SL-3 16S 2 10SL-4 15S N V W X Y Z – A 0 – – – – – – Special Insulator weight polarization (g) including contacts pin socket – 6 9 10SL-4 16S A 0 – – – – – – – 4 6 – 12S-3 16S A 0 100 70 145 215 290 – – 4 6 – 12S-4 16S D 0 – – – – – – – 3 4,5 – 12SA10 16S Instr.
PAGE 14
Cannon VG/CA-Bayonet View on Mating face of Pin Insulator No.
PAGE 15
Cannon VG/CA-Bayonet View on Mating face of Pin Insulator No. of Contacts Service rating Insulator position Position N V W X Y Z – Special Insulator weight polarization (g) including contacts pin socket – 15 25 – 18-12 16 A 0 – 80 – 280 – 18-13 60 25 18-13 8 12 A 0 – 80 110 250 280 – – 15 24 – 18-17 12 16 Instr.
PAGE 16
Cannon VG/CA-Bayonet View on Mating face of Pin Insulator No.
PAGE 17
Cannon VG/CA-Bayonet View on Mating face of Pin Insulator No. of Contacts Contact arrangement Contact size VG CA 11 – 20-33 16 9 20A9 25 19 Service rating Insulator position Position Special Insulator weight polarization (g) including contacts pin socket – 23 38 N V W X Y Z A 0 – – – – 2 3 17 20A9 12 D (J) Instr. (all others) 0 – – 110 250 – – – 21 35 20A48 15 20A48 16 Instr.
PAGE 18
Cannon VG/CA-Bayonet View on Mating face of Pin Insulator No.
PAGE 19
Cannon VG/CA-Bayonet View on Mating face of Pin Insulator No.
PAGE 20
Cannon VG/CA-Bayonet View on Mating face of Pin Insulator No.
PAGE 21
Cannon VG/CA-Bayonet View on Mating face of Pin Insulator No.
PAGE 22
Cannon VG/CA-Bayonet View on Mating face of Pin Insulator No. of Contacts Contact arrangement Contact size VG CA 37 28-21 15 28-21 16 28-22 160/4 15/16 28-22 4 16 6 3 3 Service rating Insulator position Position Y Z Special Insulator weight polarization (g) including contacts pin socket N V W X A 0 – 80 110 250 280 – – 58 93 D 0 – 70 145 215 290 – – 80 120 – – 57 77 All alternating insert position as above are permitted for VG95234 types.
PAGE 23
Cannon VG/CA-Bayonet View on Mating face of Pin Insulator No. of Contacts Contact arrangement Contact size VG CA Service rating 23 2 3 2 16 32-6 160/4 60/8 25/12 15/16 32-6 4 8 12 16 A 7 28 32-7 25 15 32-7 12 16 35 30 14 23 8 Insulator position Position Y Z Special Insulator weight polarization (g) including contacts pin socket N V W X 0 – 80 110 250 280 – – 130 170 Instr. (A, B, U, I.
PAGE 24
Cannon VG/CA-Bayonet View on Mating face of Pin Insulator No. of Contacts 54 Contact arrangement Contact size VG CA – 47 – 55 61 20 41 32A69 15 10 32A10 16 Service rating Insulator position A Position N V W X Y Z – – – – – – – – – – – – – – 80 – – – – – 110 – – – – – 250 – – – – – 280 – – – 2 3 4 8 9 12 – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – 2 3 4 8 9 12 260 110 80 250 280 100 32A47 16 A 32A55 16 A – – 80 110 250 280 – Instr.
PAGE 25
Cannon VG/CA-Bayonet View on Mating face of Pin Insulator No.
PAGE 26
Cannon VG/CA-Bayonet View on Mating face of Pin Insulator No.
PAGE 27
Cannon VG/CA-Bayonet Alternate Insert Positions Normal position Indicates location of centerline of key or keyway of shells in fixed normal position. Insert is rotated as shown by arrow and letters. Connectors according to VG95234 are generally available with insert positions X and Y only. Tolerances: # 10SL-20: ± 2° # 22-36: ± 1,5° # 32A69: ± 1° Pin Mating face Dimensions shown in mm Specifications and dimensions subject to change www.ittcannon.
PAGE 28
Cannon VG/CA-Bayonet Contact arrangement 12SA10 Special Insert Alternations Special insert alternations are marked by positions. The position number indicates the turning of the contact insert in the direction of the polarizing key in view of the mating or termination side of the socket insulator.
PAGE 29
Cannon VG/CA-Bayonet Contact Arrangements Contact arrangement No.
PAGE 30
Cannon VG/CA-Bayonet Contact Arrangements Contact arrangement No.
PAGE 31
Cannon VG/CA-Bayonet Contact Dimensions Box Mounting Receptacle VG95234 – Style A CA 3102E-B and Modifications, see page 12 Receptacle for front panel mounting with square flange. Threaded holes in flange not possible. VG95234 Part no. VG95234A-10SL – VG95234A-14S VG95234A-16S VG95234A-16 VG95234A-18 VG95234A-20 VG95234A-22 VG95234A-24 VG95234A-28 VG95234A-32 VG95234A-36 1) Cannon Part no.
PAGE 32
Cannon VG/CA-Bayonet Box Mounting Receptacle VG95234 Style B1 (with threaded holes in flange) CA3102-B and Modifications, e g -04, -109 or -111 CA3102-B designates a receptacle with square flange for rear panel mounting. VG95234 Style B2 (with through holes in flange) CA3102E-B and Modifications, see page 12 Style B2 VG95234 Part no. Cannon Part no. d1 max.
PAGE 33
Cannon VG/CA-Bayonet Socket Thru-Bulkhead Receptacle Pin VG95234 Style C1 resp. TBF-B (with threaded holes) VG95234 Style C2 resp TBF-B-05 (with flange through holes) TBF-B designates a bulkhead receptacle with mounting flange. Modifications see page 12 Style C2 VG95234 Part no. Cannon Part no.
PAGE 34
Cannon VG/CA-Bayonet Plug 90° VG95234 Style E1 (with flex tube) CA 3108 F-B and Modifications, see page 9 CA3108E/F designates a plug 90°, which is available with cable clamp and bushing (E) or with flex tube termination (F) VG/CA E1/F VG95234 Style E (with cable clamp and telescoping bushing) VG E CA 3108E-B and Modifications, see page 12 VG 95 234 Part no. Cannon Part no.
PAGE 35
Cannon VG/CA-Bayonet Straight Plug VG95234 – Style G CA3106E-B, -02, -03 or -06 designates a straight plug with adapter for heat shrinkable boots CA3106E-B and Modificationes, see page 12 VG95234 Part no. VG95234G-10SL-* – VG95234G-14S-* VG95234G-16S-* VG95234G-16-* VG95234G-18-* VG95234G-20-* VG95234G-22-* VG95234G-24-* VG95234G-28-* VG95234G-32-* VG95234G-36-* 1) Cannon Part no.
PAGE 36
Cannon VG/CA-Bayonet Wall Mounting Receptacle for rear mounting VG95234 Style J1 (with threaded holes in flange) VG95234 Style J2 (with through holes in flange) CA3100E-B and Modifications e g -05 (with through holes) CA3100E-B designates a wall mounting receptacle with cable clamp and telescoping bushing CA3100E-B and Modifications e g -01, -F80 (for ordered contacts) VG95234 Part no.
PAGE 37
Cannon VG/CA-Bayonet Straight Plug, shielded VG95234 Style L CA3106F-B-13, -14 or -15 designates a straight plug with endbell for flex tube, grounding spring on the barrel. CA3106F-B and Modifications, see page 12 VG95234 Part no. VG95234L-10SL-* VG95234L-12S-* VG95234L-14S-* VG95234L-16S-* VG95234L-16-* VG95234L-18-* VG95234L-20-* VG95234L-22-* VG95234L-24-* VG95234L-28-* VG95234L-32-* VG95234L-36-* 1) Cannon Part no.
PAGE 38
Cannon VG/CA-Bayonet Wall Mounting Receptacle VG95234 Style N1 (with threaded holes in flange) VG95234 Style N2 (with through holes in flange) CA3100E-B , -13, -14 or -15, -05-13, -05-14 or -05-15 designates a shielded receptacle with endbell for shielding braids, and also for heat shrinkable boots CA3100E-B and Modifications, see page 12 /Mod.-05 VG95234 Part no. Cannon Part no.
PAGE 39
Cannon VG/CA-Bayonet Wall Mounting Receptacle VG95234 Style S1 (with thread holes in flange) CA3100E-B, -32, -32-05 designates a wall mounting receptacle, shielded, with endbell for system cable acc. MTV 6145-005. CA3100E-B and Modification, see page 12 Mod. -05 VG95234 Part no. VG95234S1-14S VG95234S1-16S VG95234S1-18 VG95234S1-20 VG95234S1-28 VG95234S1-32 Cannon Part no.
PAGE 40
Cannon VG/CA-Bayonet Wall Mounting Receptacle VG95234 Style U1 (with threaded holes in flange) VG95234 Style U2 (with through holes in flange) CA3100E-B-02-05, -03-05 or -06-05, -02-03 or -06 designates a wall mounting receptacle with adapter for heat shrinkable boots CA3100E-B and Modifications, see page 12 VG95234 Part no.
PAGE 41
Cannon VG/CA-Bayonet Wall Mounting Receptacle CA3100E-B-08 (Flange with threated holes) CA3100E-B-09 (Flange with through holes) CA3100E-B-08, -09 designates a wall mounting receptacle, with 90° endbell, cable clamp and telescoping bushing. Modification see page 12 Cannon Part no.
PAGE 42
Cannon VG/CA-Bayonet Wall Mounting Receptacles CA3100R-B designates a wall mounting receptacle with short endbell without cable clamp. CA3100R-B and Modifications, see page 12 Mod -05 Cannon Part no.
PAGE 43
Cannon VG/CA-Bayonet Wall Mounting Receptacle CA3100F-B designates a wall mounting receptacle with straight endbell and protective hose. CA3100F-B and Modifications, see page 12 Mod -05 Cannon Part no.
PAGE 44
Cannon VG/CA-Bayonet Straight Plug CA3101R-B designates a cable connection plug with short endbell, without cable clamp CA3101R-B and Modification, see page 12 Cannon Part no. CA3101R10SL-**-B-*** CA3101R12S-**-B-*** CA3101R14S-**-B-*** CA3101R16S-**-B-*** CA3101R16-**-B-*** CA3101R18-**-B-*** CA3101R20-**-B-*** CA3101R22-**-B-*** CA3101R24-**-B-*** CA3101R28-**-B-*** CA3101R32-**-B-*** CA3101R36-**-B-*** 1) d1 -0,15 18,2 21,4 24,6 27,4 27,4 30,8 34,2 37,4 40,9 46,7 53,4 59,6 d2 min.
PAGE 45
Cannon VG/CA-Bayonet Jam Nut Receptacle CA07A-B Cannon Part no.
PAGE 46
Cannon VG/CA-Bayonet Coupling Dimensions for connector style A, B1, B2, C1, C2, F, J1, J2, N1 and N2 resp. CA3100, CA3101, CA3102 and TBF A = Contact size 10 B = Contact size 15S, 15, 16S, 16 C = Contact size 25, 12 D = Contact size 60, 100, 160, 500, 8.4, 0 E = Contact size 10 F = Contact size 15S, 16S G = all others Shell size d1 -0,15 d2 +0,3 10SL 18,2 21,4 12S 14S 24,6 27,4 16S 27,4 16 30,8 34,2 37,4 40,9 46,7 53,4 59,6 18 20 22 24 28 32 36 d4 +0,4 d5 +0,8 l1 min.
PAGE 47
Cannon CA-Bayonet IP69K General Information Scope This specification describes a similar CA-B connector with a sealing degree up to IP69K. This connector is interchangable with the corresponding types as per MIL-C-5015 and VG95234, as they offer the same mounting dimensions and contact arrangements. These connectors are without spring washer, friction ring and grommet. Recommended Method of Mounting Connector shell is fixed with 4 screws on the housing.
PAGE 48
Cannon CA-Bayonet IP69K How to order Cannon Order reference CA 06 X H 20 29 S N B — D17-A240 Series Shell Style Class Sealing Material Shell Size Contact Arrangement Contact Type Insulator Position Coupling Mechanism Dash Modification Cable Sealing Area Explanation Series CA Shell Style 02 = Wall mounting receptacle, front panel mounting 06 = Straight plug, without spring washer, friction ring and grommet Class X=Universal endbell IP69K Sealing Material H= FKM sealing Without = CR-Sealing / we
PAGE 49
Cannon CA-Bayonet IP69K Modification 01 41 F80 A176 A232 A233 A240 F0 – metric crimp contacts – shielded version, grounding spring on barrel – AWG crimp contacts – gold plated contact, see pages 50-51 – Zinc cobalt black plating – Zinc cobalt green plating – Zinc Nickel plating, blue iridescent – less contacts, contacts to be ordered separately, see pages 51– 52 Dimensions shown in mm Specifications and dimensions subject to change www.ittcannon.
PAGE 50
Cannon CA-Bayonet IP69K General Current Rating Current rating tested acc. To VG95234 part 1 IP69K in combination with universal endbell and o-ring (flange receptacle to wall) other styles: IP67 acc. To DIN 40050 (1 bar / 12 h) Attention! Longitudinal sealing: The connector is not sealed against fluids entering throughthe cable, as the sealing lips of the single wire sealing are pressing against the jacket of the individual cables. Electrical Data (0,3 - 0,6 mm²) Insulation Resistance Test acc.
PAGE 51
Cannon CA-Bayonet IP69K Connector Dimensions Cable Connecting Plug Universal Endbell Bayonet Endbell: Universal Endbell Shielding: Yes Sealing (*): IP67, IP68, IP69K CA01X… Straight plug for cable connection with universal endbell. Please pay attention that the diameter of the cable is in the sealing range ØH. Part No. ØA ØB C D E ØF G - 0,15 ± 0,2 + 0,4 ± 0,2 max max ± 0,2 min ØH Sealing Range CA01X10SL-**…D07… 18.2 17.9 18.2 2.8 85 25.2 20.6 4.5 - 7.2 mm CA01X14S-**…D07… 24.
PAGE 52
Cannon CA-Bayonet IP69K Straight Plug Universal Endbell Bayonet Endbell: Universal Endbell Shielding: Yes, with Modification Code Sealing (*): IP67, IP68, IP69K CA06X…-B… Straight plug with universal endbell. Please pay attention that the diameter of the cable is in the sealing range ØH. Part No.
PAGE 53
Cannon VG/CA-Bayonet Plastic Protecting Caps Colour: red (similar to RAL 2003) Part no.
PAGE 54
Cannon VG/CA-Bayonet Metal Protecting Caps for receptacles, shell style 3100, 3101 und 3102 Material: Aluminum alloy VG95234 Style KA with cord Shell size 10SL 12S 14S 16S 16 18 20 22 24 28 32 38 VG95234 Part No. with chain VG95234KR10SL VG95234KR14S VG95234KR16S VG95234KR16 VG95234KR18 VG95234KR20 VG95234KR22 VG95234KR24 VG95234KR28 VG95234KR32 VG95234KR38 Cannon A66 Part No.
PAGE 55
Accessories Dummy Receptacles Front panel mounting (rear side open) VG95234 Style BOD (Flange with through-holes) CA3105-B Shell size 10SL 12S 14S 16S 16 18 20 22 24 28 32 36 VG95234 Part no. VG95234BOD10SL – VG95234BOD14S VG95234BOD16S VG95234BOD16 VG95234BOD18 VG95234BOD20 VG95234BOD22 VG95234BOD24 VG95234BOD28 VG95234BOD32 VG95234BOD36 Cannon Part no.
PAGE 56
Accessories Sealing Rings for use on the barrel of the plug Size 10SL 12S 14S 16/16S 18 20 22 24 28 32 36 Part no. 980-8550-000 980-8551-000 980-8552-000 980-8553-000 980-8554-000 980-8555-000 980-8556-000 980-8557-000 980-8558-000 980-8559-000 980-8560-000 d9 9,0 11,5 14,0 17,0 19,5 22,5 25,4 28,5 34,0 40,0 45,0 Wire Hole Fillers Are needed in case of none occupied contacts. Contacts have to be installed while the wire hole fillers are mounted into the relevant open grommet holes.
PAGE 57
Accessories Cable Clamps without telescoping bushing VG95234 Style KK VG95234 Part no. Former Designation MS VG95234KK 4 VG95234KK 6 VG95234KK 8 VG95234KK12 VG95234KK12 VG95234KK16 VG95234KK20 VG95234KK24 MS3057- 4A* MS3057- 6A* MS3057- 8A* MS3057-10A* MS3057-12A* MS3057-16A* MS3057-20A* MS3057-24A* Shell size suitable for connectors acc. MS 10SL, 12S, 14S, 16S, 16 18 20, 22 24, 28 32 36 A-Thread l2 max. d1 max. l1 max. l3 max.
PAGE 58
Accessories Gaskets Thickness of gaskets made of Alu-Flex “2“ = 0,5 mm made of Polychloropren “1“ = 1,0 mm VG95234 Style DA for front panel mounting VG95234 Style DH for front panel mounting For front panel mounting Size VG95234 Part no. 10SL 12S 14S 16/16S 18 20 22 24 28 32 36 VG95234 DA 10SL-X VG95234 DA 14S-X VG95234 DA 16X VG95234 DA 18-X VG95234 DA 20-X VG95234 DA 22-X VG95234 DA 24-X VG95234 DA 28-X VG95234 DA 32-X VG95234 DA 36-X Part no.
PAGE 59
Contacts Contacts Standard contacts and contacts with reduced termination diameter Size 15S/16S, 15/16, 25/12, 60/100/8, 160/4, 500/0 Size 10/20 Pin contacts Finish A36 – A176 – 5 µm silver plated and passivated 2 µm nickel plated, min. 0,5 µm gold plated Contact size VG95234 Part no.
PAGE 60
Contacts Contacts Size 10/20 Size 25/12 Size 15S/16S, 15/16 Size 60/100/8, 160/4, 500/0 Standard contacts and contacts with reduced termination diameter Socket contacts Finish A36 – 5 µm silver plated and passivated 2 µm nickel plated, min. 0,5 µm gold plated A176 – Contact VG95234 size Part no.
PAGE 61
Contacts Tools For pin and socket contacts according VG95234 and for Cannon contacts with reduced coupling dimensions.
PAGE 62
Contacts Basic - Hydraulic - Electrically driven tool Basic - Hydraulic - Manual Operated tool Version A Version B H- Crimp Head H - Crimp Head Electro-Hydraulic Aggregat EHA2 - ITT Fußschalter / Footpedal Pump Handle with Reset Function Handle Version Description Marking Part Number A Electro-Hydraulic - Aggregat with footpedal HP400EL-ITT 121586-5253 B Manually operated Hydraulic handtool EPK400U-ITT 121586-5257 Crimp Dies Product Line Contact Size Part Number Hex.
PAGE 63
Notes Dimensions shown in mm Specifications and dimensions subject to change www.ittcannon.
PAGE 64
Part Number Search Part Number Search Part Number Page 012-0218-000......................57 012-0219-000......................57 012-0220-000......................57 012-0223-000......................57 012-8552-000......................57 012-8554-000......................57 012-8555-000......................57 012-8556-000......................57 012-8557-000......................57 012-8558-000......................57 012-8558-000......................57 025-8636-005......................
PAGE 65
Part Number Search Part Number Search Part Number Page VG95234B12.......................56 VG95234B16.......................56 VG95234B16S.....................56 VG95234B20.......................56 VG95234BOD10SL...............55 VG95234BOD14S................55 VG95234BOD16..................55 VG95234BOD16S................55 VG95234BOD18..................55 VG95234BOD20..................55 VG95234BOD22..................55 VG95234BOD24..................55 VG95234BOD28..................55 VG95234BOD32......
PAGE 66
Product Safety Information THIS NOTE MUST BE READ IN CONJUNCTION WITH THE PRODUCT DATA SHEET/CATALOG. FAILURE TO OBSERVE THE ADVICE IN THIS INFORMATION SHEET AND THE OPERATING CONDITIONS SPECIFIED IN THE PRODUCT DATA SHEET/ CATALOG COULD RESULT IN HAZARDOUS SITUATIONS. 1. MATERIAL CONTENT AND PHYSICAL FORM Electrical connectors do not usually contain hazardous materials. They contain conducting and non-conducting materials and can be divided into two groups.
PAGE 67
Circular/Filter/Hermetic Connectors As a world leader in circular, filter, and hermetic connectors, ITT can leverage its design and manufacturing expertise to fit virtually any application. Our expertise includes fast positive mating for a wide range of military applications, as well as numerous sizes and contact configurations for various harsh environments. ITT can meet numerous specs, including NATO and MIL standards. www.ittcannon.com/cirDVMBST q XXX JUUDBOOPO DPN GJMUFS q XXX.ittcannon.
PAGE 68
ITT Interconnect Solutions Cannon, VEAM, BIW Visit our website at www.ittcannon.com Global Design & Manufacturing Customer Support North America Europe & Middle East Asia MEXICO - Cannon, VEAM Av. Libre Comercio s/nentre Calzada Industrial Nuevo Nogales y Calzada del Raquet Club, Parque Industrial Nuevo Nogales phone: +52.631.3110050 fax: +52.631.3110060 FRANCE - Cannon, VEAM 15, Boulevard Robert Thiboust Serris, France 77700 phone: +33.1.60.04.93.93 fax: +33.1.60.04.93.