Datasheet

www.ittcannon.com

Dimensions shown in mm (inch)

Specifications and dimensions subject to change

Blanking Plugs

• Blanking plugs are used to repair

damaged seals. If the membrane seal

is pierced in a position that is not

normally used, then the blanking

plug will restore the seal.

Note: Replacement membrane seals are also

available. Contact ITT for details.

Blanking Plugs for

Signal Cavities

Part Number Nomenclature

192991-0018 TNA**BPSG-00B

Discriminating (Keying)

Pins

• Discriminating (keying) pins are used

to prevent cross-mating of similar con-

nectors. These pins are used in place of

a pin contact. The corresponding socket

cavity must be left open. If a socket

contact is present, the discriminating

pin will prevent mating.

• The discriminating pin is installed from

the mating side of the connector.

Part Number

Pin Type (Pack of 25)

Signal 192990-0000

Power 192900-0189

Discriminating Pin Insertion

Prevents Cross - Mating

Spare Jam Nuts

• To order with Bulk packaged Jam

Nut Receptacles.

Shell

Size Part Number Nomenclature ØA max. B Nom C

14 192900-0489 TNA14JN00-00B 36,00 (1.417) 31,00 (1.220) 6,00 (.236)

16 192900-0488 TNA16JN00-00B 40,60 (1.598) 35,00 (1.378) 6,00 (.236)

24 192900-0487 TNA24JN00-00B 56,00 (2.205) 49,00 (1.929) 7,00 (.275)

Neptune Circular Accessories

Cannon Trident Connectors

Pack of 100