Datasheet

31
www.ittcannon.com
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
Reversed Plug
for Socket Contacts
Mates with Reversed Receptacles, see page 32.
Accepts socket contacts, see page 64.
Discriminating (Keying) Pins available, see page 73.
Can be water sealed to IP65.
IMPORTANT NOTE: Standard and Reversed Format
Equipment design dictates whether the fixed connector is “live” or “dead” when
disconnected. Connector housings are available that
provide socket contacts on the live side of the equipment.
Standard Format: Receptacle with socket contacts.
Reversed Format: Receptacle with pin contacts.
Standard and Reversed connectors are not intermateable.
Shell Number of Dimensions Accessory
Size Contacts Part Number Nomenclature ØA ± 0,20 (.008) B max. Ø C ± 0,15 (.005) ØD ± 0,15 (.005) E Thread
10 4 192926-0500 TR1004PFS1NB 21,60 (.850) 26,10 (1.027) 11,00 (.433) 12,20 (.480) 19,10 ±0,20 (.751 ±.007) 9/16 - 24 UNEF
12 8 192926-0510 TR1208PFS1NB 24,80 (.976) 25,60 (1.008) 13,90 (.547) 15,10 (.594) 19,10 ±0,20 (.751 ±.007) 11/16 - 24 UNEF
14 12 192926-0520 TR1412PFS1NB 28,00 (1.102) 26,80 (1.055) 17,10 (.673) 18,30 (.720) 19,10 ±0,20 (.751 ±.007) 13/16 - 20 UNEF
16 19 192926-0530 TR1619PFS1NB 31,20 (1.228) 27,60 (1.087) 20,00 (.787) 21,40 (.842) 19,10 ±0,20 (.751 ±.007) 15/16 - 20 UNEF
18 7 192990-1390 TR1807PFS1NB 34,30 (1.350) 31,50 (1.240) 22,50 (.885) 24,00 (.944) 19,10 ±0,20 (.751 ±.007) 1-1/16 - 18 UNEF
18 23 192990-1380 TR1823PFS1NB 34,30 (1.350) 25,60 (1.088) 22,50 (.885) 24,00 (.944) 19,10 ±0,20 (.751 ±.007) 1-1/16 - 18 UNEF
20 28 192926-0540 TR2028PFS1NB 37,50 (1.476) 31,30 (1.232) 25,70 (1.011) 27,10 (1.066) 19,10 ±0,20 (.751 ±.007) 1-3/16 - 18 UNEF
22 35 192926-0550 TR2235PFS1NB 40,70 (1.602) 31,30 (1.232) 28,60 (1.126) 30,40 (1.196) 19,10 ±0,20 (.751 ±.007) 1-5/16 - 18 UNEF
24 48 192990-1400 TR2448PFS1NB 43,90 (1.728) 31,30 (1.232) 31,80 (1.225) 33,50 (1.318) 14,72 ±0,15 (.580 ±.006) 1-7/16 - 18 UNEF
Ringlock Circular Connectors
Cannon Trident Connectors
Single Piece Connector
Note: For versions with plastic locking ring, please consult the factory.