Datasheet

75
www.ittcannon.com
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
Mini Applicators
(for Stamped Contacts)
AWG Contact Mecal
Size Description Part Number
14-16 Trident Signal 121586-5240
16-18 Trident Signal 121586-5217
20-26 Trident Signal 121586-5239
12-14 Trident 30 A Power *
14-16 Trident 30 A Power *
18-20 Trident 30 A Power *
Mini Applicators are interchangeable
modules that will fit into many
standard crimping machines. They are
available for all sizes of stamped sig-
nal and power contacts.
* For details please consult the factory
Part
Nomenclature Description Number AWG
WA27F-CE Pneumatic Crimp Tool 121586-5067 12-20
WA22F-CE Pneumatic Crimp Tool 121586-5070 20-32
BM-2 Bench Mount 121586-5068
WA10 Foot Pedal 121586-5069
Pneumatic Table Crimp Tool
(for Machined Contacts)
This Hand Crimp Tool fully meets the
requirements of specification MIL-C-22520.
The tool produces eight-indent crimp termi-
nations of excellent quality. Together with
the bench mount BM-2 and the food pedal
WA-10 it becomes an installed tool facilitat-
ing the work: The Hands of the operator are
free to insert the contact and the wire and
to remove the terminated contact.
Part
Nomenclature Description Number
HACS-5 Semi-Automated Crimp Machine 120090-0118
Semi-Automated
Crimp Machine HACS-5
(for Machined Contacts)
With the semi-automated crimp
machine HACS-5 machined contacts are
terminated fast and reliably. 20 to 25
crimp terminations per minute can be
achieved. The user has the choice
between automatic and manual opera-
tion.
Electrical Data
Protection Class: IP51
Electrical Power: 240 V ac, 50 Hz
Automatic Application Tools
Cannon Trident Connectors
Description Part Number
Testing Gauge 317-8675-133
Testing Gauge
(for Stamped Contacts)
The testing gauge will be helpful to check
whether a crimp is ok or not.
The contact should be inserted into the
test fixture without scratching the test
hole (diameter 3.3 mm).