Datasheet
18
www.ittcannon.com
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
Cannon Trident Connectors
Snap Together - Slimline
The Slimline Range offers a low profile
connector system that is well suited for circuit
board applications. The precision machined
contacts are ideal for power and sensitive
signals. All Snap Together - Slimline connectors
are RoHS Compliant.
Applications:
• Junction Boxes.
• Communications equipment.
• Test equipment.
• Instrumentation.
Product Features
• Less than 10,00 (.393) width on PC board.
• Pin headers pre-loaded with straight or 90° machined solder tail pins.
• Mating plug accepts all Trident signal crimp socket contacts, see page 64.
• Plugs have integrally molded quick connect/disconnect latches.
• Five single row contact arrangements available.
• Recognized under the component program of UL Inc.
• Gold plated version available with earth pin capability.
• 10 A per circuit.
Performance Specifications
Materials and Finishes
Insulator Black Nylon, UL 94 V-0
Test Method Criteria of Acceptance
Dielectric Withstanding Voltage 2000 V ac No breakdown
Thermal Shock -55°C to +125°C (-67°F to +257°F), 5 cycles No physical damage
Physical Shock 50 g’s peak, 3 axes, No physical damage.
11 millisecond duration half-sine pulse No loss of continuity >1 sec
Vibration 10 g’s peak, No physical damage,
10-500 Hz, 9 hours No loss of continuity >1 sec
Durability 500 cycles of mating and unmating, No mechanical or
500 mating cycles max electrical defects
Salt Spray 48 hours Shall be capable of mating and unmating
and meet contact resistance requirements
High Temperature Endurance 1000 hours at 125°C (+257°F) Insulation Resistance > 100 MW
Humidy Steady State RH 90-95%, 40°C (+125°F), 504 hours Insulation Resistance > 100 MW
Moisture Resistance 10 Cycles Insulation Resistance > 100 MW
The table below summarizes the results of key tests. Data is applicable to standard connectors with standard contacts.
Variations may affect this data, so please consult factory for further information on your requirements.
Test Specifications
1
Depends on contacts used, layout, and degree of pollution
2
Depends on number and type of contacts used
3
Depends on plating and type of contacts used
Operating Voltage
1
Up to 250 V ac rms
Contact Current Rating
2
Up to 10 A
Operating Temperature -55°C to +105°C (-67°F to +221°F) for free Plug & Receptacles
-40°C to +105°C (-40°F to +221°F) for PCB Mounted Receptacles
Insulation Resistance 5000MW min. at 500 V dc
Durability
3
Up to 500 Mating Cylces
Connector Latching Force 150 N min. with latches engaged
Panel Retention Force 500 N min.
Flammability UL 94 V-0