Certification Exhibit FCC ID: SK9SNIC1 IC: 864G-SNIC1 FCC Rule Part: 15.247 ISED Canada Radio Standards Specification: RSS-247 Project Number: 72124916 Manufacturer: Itron, Inc. Model: SNIC1 Manual 5015 B.U.
OpenWay® Riva™ Smart Network Interface Card (NIC) User Guide
Identification OpenWay® Riva™ Smart Network Interface Card (NIC) User Guide - Draft 24 March 2017 TDC-XXXX-YYY OpenWay® Riva™ Smart Network Interface Card (NIC) Copyright © 2017 Itron, Inc. All rights reserved. Confidentiality Notice The information contained herein is proprietary and confidential and is being provided subject to the condition that (i) it be held in confidence except to the extent required otherwise by law and (ii) it will be used only for the purposes described herein.
Innovation, Science and Economic Development Canada (ISED) This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Cet appareillage numérique de la classe B répond à la norme Canadienne sur le matériel brouilleur.
Labeling The following requirements apply to any products that use this module. The end product or host label includes the following text: • • • Contains: FCC ID: SK9SNIC1 IC: 864G-SNIC1, Model: SNIC1 The user’s manual for any product that contains this module must contain the following text. If the device is large enough, then this must also be placed on the label. "This device complies with Part 15 of the FCC Rules.
Contents Regulatory Compliance................................................................................................. ii FCC Part 15, Class B ................................................................................................................ ii Changes or modifications to this device not expressly approved by Itron, Inc. could void the user’s authority to operate the equipment. ...............................................................................
Contents Labeling The following requirements will be applied to any products that use this module: The end product or host label will include the following text: • • • Contains: FCC ID: SK9SNIC1 IC: 864G-SNIC1, Model: SNIC1 The user’s manual for any product that contains this module will contain the following text. If the device is large enough, then this will also be placed on the label. “This device complies with Part 15 of the FCC Rules.
Contents Changes or modifications to this device not expressly approved by Itron, Inc. could void the user’s authority to operate the equipment. Innovation, Science and Economic Development Canada (ISED) This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations.
Contents The module operates on DC voltage which is supplied by a optional power board or host device. Recycling Information The product you have purchased contains circuit boards. At the end of the modules useful life, under various state and local laws, it may be illegal to dispose of certain components into the municipal waste system. Check with your local solid waste officials for details about recycling options or proper disposal.
CHAPTER 1 Overview This document provides information on the design, construction, and operation of the OpenWay Riva Smart Network Interface Card (NIC) module. The module consists of two major components: the communications board and the antenna. The sample module housing is constructed using polycarbonate material that provides protection for the internal components. Power may be supplied from optional power board or supplied from a host supply.
Overview IT Department User Guide 2
CHAPTER 2 Module Description Module boards The Smart NIC Module contains 2 boards: the network interface card and the antenna board (shown with optional power board). The power board and the NIC board are separated by a plastic standoff as shown in the illustration.
Module Description Illustration Callout # Field 1 NIC Board 2 Power Board 3 Plastic Standoff 4 Antenna Board Module enclosure (option) The Smart NIC modules can be enclosed in the sealed polycarbonate enclosure shown in the illustration for installation various optional hosts.
Module Description Module enclosure nameplate Module enclosure installed in optional host IT Department User Guide 5
Module Description Enclosed module in optional host showing label Enclosed module in optional host IT Department User Guide 6
Module Specifications CHAPTER 3 Module Specifications Power Requirements Peak Power Consumption: Total Instantaneous Peak @ 24vdc: Description 13W Long Term Thermal Average @ 24vdc: 3.
Module Specifications DBPSK ROBO Super-ROBO Radio Frequency (RF) Embedded Antenna Optional RF Connector 100 kbps 34 kbps 23 kbps For devices/meters with plastic enclosure For devices/meters with metal enclosure or special needs Protocol IEEE 802.15.
CHAPTER 4 IT Department User Guide 9
