User's Manual

GridRouter™ User Guide
47
Echelon DC – Start IP Address: Specifies the beginning of the IP address range to assign to the DC.
Echelon DC – End IP Address: Specifies the end of the IP address range to assign to the DC.
Echelon DC – Lease Time: Specifies the number of minutes the DC will be allowed to use that local IP
address.
Active DHCP Leases
A list of the currently active DHCP leases.
6.3.1.4 Hosts
The Network > Hosts screen is used to configure the hosts file on the GridRouter. When accessing a
device by name, the GridRouter’s networking system attempts to locate the name within the hosts file
before accessing the DNS server.
Figure 6-185: Network > Hosts
Host Names
Host Name: Specifies the name of the device.
IP Address: Specifies the IP address of the device with the specified host name.
Deleted:
3