User's Manual

GridRouter™ User Guide
43
Enable as Wi-Fi Access Point”.
Figure 6-141: Network > Interfaces
Wireless Adapter radio Configuration
To change the physical aspects of the wireless card, edit these options.
Radio: Turns broadcasting on or off for the device.
Channel: Specifies the physical channel the radio is broadcasting on.
Wireless Distance: Used to set the transmit power of the device. [Unused]
Wireless Virtual Adaptor Configuration
To change the software settings for the wireless card, edit these options.
Network: Affiliates a wireless card with a network on the system. This value will often be set to “wlan” or
“wifi” depending on the name of the interface that was added.
Mode: Sets the wireless card to be an “Access Point”, “Client”, or “Ad Hoc”. Currently only “Access
Point” is supported.
AP Isolation: This isolates all wireless devices on the GridRouter network from each other. [Unused].
RTS: Request to send threshold.
Fragmentation: Fragmentation threshold.
ESSID: Specifies the broadcasted name of the Access Point.
Encryption Type: Encryption type used.
Deleted:
Enable as Wi-Fi Access
Point
Deleted:
3