Installation Guide
Table Of Contents
- 500W ERT® Module Remote Installation Guide
- Contents
- New in This Document
- 1 Important Safety and Compliance Information
- 2 About the 500W ERT Module
- 3 Initializing and Connecting
- 4 Installing the Remote 500W ERT Module
- 5 Completing Gel-cap Connections Using the Itron Splice Kit
- 6 Using the Itron Cable Armor
- 7 Troubleshooting
New in This Document
Revision Date Description
008 June 2021
■ Updated the table in Description on page 10 to include ERW-
1601-007. Also updated description for ERW-1601-002.
007 April 2021
■ Added New Zealand, RCM Spectrum Compliance on page 7
006 February 2021
■ Updated document to apply to modules on both GenXand
OpenWay Riva networks
005 February 2021
■ Updated Firmware Functionality on page 13 versions for
GSR5.1 and 5.3 support
004 January 2021
■ Added GSR5.3 compatibility information to Firmware
Functionality on page 13
003 April 2020
■ Updated reference in OpenWay Riva Leak Sensor (OLS)
Installation on page 30
002 March 2020
■ Added GSR5.1 compatibility information to Firmware
Functionality on page 13
001 January 2020
■ Added Australia, ACMA Spectrum Compliance on page 7
000 July 2019 First publication.
30 June 2021 815-0005-00 REV 008 Itron, Inc. Page 5 of 45