Installation Guide
Table Of Contents
- 500W ERT® Module Remote Installation Guide
- Contents
- New in This Document
- 1 Important Safety and Compliance Information
- 2 About the 500W ERT Module
- 3 Initializing and Connecting
- 4 Installing the Remote 500W ERT Module
- 5 Completing Gel-cap Connections Using the Itron Splice Kit
- 6 Using the Itron Cable Armor
- 7 Troubleshooting
6. Insert the connectors and wires into the splice tube until the connectors and wires are
completely immersed in the non-conductive gel material.
7. Separate the cable wires to the sides and close the splice tube cover.
8. Remove any leftover materials from the customer premises.
500W ERT Module Remote Installation Guide 5 Completing Gel-cap Connections Using the Itron Splice Kit
30 June 2021 815-0005-00 REV 008 Itron, Inc. Page 42 of 45