User's Manual
Table Of Contents
- Contents
- Before You Begin
- About the OpenWay Riva Pit Module
- Initializing, Connecting, and Programming the OpenWay Riva Water Pit Module
- Installing the OpenWay Riva Water Pit Module
- Pit Module Mounting Accessories
- Pit Modules with Integral Connectors
- Through Lid Installation
- Rod Mount Installation
- Wall Mount Installation
- Optional Riva Leak Sensor Installation
- Connecting the Riva Leak Sensor to the Riva Water Module
- Optional Remote Water Disconnect Valve Installation
- Using the Itron Cable Armor
- Using an Inline Connector
- Troubleshooting
Installing the OpenWay Riva Water Pit Module
TDC
-1666-000 OpenWay Riva Water Pit Module Installation Guide 18
Proprietary and Confidential
3. Align the Riva Leak Sensor connector with the pit module's blue connector and insert.
4. Rotate the connector locking ring until the security holes align.
Caution Do not force the connector ends together. While you hold the Riva Leak Sensor connector,
engage the pit module connector by rotating the locking ring until both connectors securely connect.
Twist only the connector locking ring, not the body of the connector. Twisting the connector body could
damage the connector's pins.
To attach an Itron security seal through the connector security hole
1. Insert the pointed end of the security seal through the inline connector and the pit module connector
security holes.