Installation Guide
Table Of Contents
- OpenWay Riva Gas Disconnect Installation Guide
- Table of Contents
- 1 Important Safety and Compliance Information
- USA, FCC Part 15 Spectrum Compliance
- Canada, ISED Spectrum Compliance
- RF Exposure (FCC/ISED)
- Electromagnetic Compatibility
- Intrinsic Safety
- Lithium Battery
- Transportation Classification
- Modifications, Repairs, Installation, and Removal
- Aluminum Enclosure
- Electrostatic Discharge
- Electrostatic Ignition Hazard
- Device Cleaning
- Do Not Drop
- Product Notification
- 2 OWRGD Installation Guide Overview
- 3 About the OpenWay Riva Gas Disconnect
- 4 Installing the OWRGD
- 5 Connecting the Flood Sensor to the OWRGD
- 6 OWRGD Operations
■
Measurement -30° F (-34° C) to +131° F (55° C)
■
Valve -13° F (-25° C) to +131° F (55° C)
■
500G -40° F (-40° C) to +158° F (70° C)
Storage range:
■
-40° F (-40° C) to +158° F (70° C)
Direct inquiries as to the selection and application of gas meters to your local Itron sales
representative or Itron Support.
■
Itron does not endorse or warrant the completeness or accuracy of any third-party meter
installation procedures or practices, unless otherwise provided in writing by Itron.
■
Follow your company's standard operating procedures regarding the use of personal
protection equipment (PPE).
■
Adhere to guidelines issued by your company in addition to those given in this document
when installing or repairing meters.
■
This product, as of the date of manufacture, is designed and tested to conform to all
governmental and industry safety standards as they may apply to the manufacturer.
■
The purchaser and user of this product must comply with all fire control, building codes, and
other safety regulations governing the application, installation, operation, and general use of
this meter to avoid leaking gas hazards resulting from improper installation, start-up, or use
of this product.
■
To ensure safe and efficient operation of this product, Itron strongly recommends installation
by a qualified professional.
■
Itron does not endorse or warrant the completeness or accuracy of any third-party meter
installation procedures or practices, unless otherwise provided in writing by Itron.
■
Follow your company's standard operating procedures regarding the use of personal
protection equipment (PPE).
■
Adhere to guidelines issued by your company in addition to those given in this document
when installing or repairing meters.
■
This product, as of the date of manufacture, is designed and tested to conform to all
governmental and industry safety standards as they may apply to the manufacturer.
■
The purchaser and user of this product must comply with all fire control, building codes, and
other safety regulations governing the application, installation, operation, and general use of
this meter to avoid leaking gas hazards resulting from improper installation, start-up, or use
of this product.
■
To ensure safe and efficient operation of this product, Itron strongly recommends installation
by a qualified professional.
14 August 2020 815-0382-00 9
OpenWay Riva Gas Disconnect Installation Guide 1 Important Safety and Compliance Information